How much weight can a Honda Ridgeline carry in the bed?
Typically around 1,500 pounds of payload capacity in the bed, depending on the year, trim, and options. For your exact figure, check the data plate on the door jamb or the owner's manual.
Payload is the maximum weight a Ridgeline can safely carry beyond its own curb weight, including passengers and cargo. The bed load is the portion carried in the truck bed, and it is governed by that overall payload rating. Loading near the limit can affect handling, braking, and warranty coverage, so it should be approached with care.
Understanding payload and bed capacity
Used in everyday measurements, payload combines passenger and cargo weight. Most recent Ridgelines list a payload around 1,400–1,580 pounds, with variations by drivetrain and trim. The more equipment your truck has (and the heavier the occupants), the lower the available bed weight for cargo.
What affects the bed-carrying limit
Several factors can push the usable bed weight down from the baseline payload rating:
- Drivetrain and trim level (2WD vs 4WD can change curb weight)
- Available factory options and aftermarket gear that add weight (bed liners, racks, hitch equipment)
- Number and approximate weight of occupants in the cabin
- Added accessories or equipment that increase curb weight and reduce payload
Always verify your specific vehicle's numbers on the data plate or in the owner's manual, and load within the stated limit.
How to determine the exact capacity for your Ridgeline
To determine your Ridgeline's exact bed-carry capacity on a given day, use these steps:
- Find the Gross Vehicle Weight Rating (GVWR) and curb weight listed on the door jamb data plate or owner's manual.
- Calculate the payload capacity: GVWR minus curb weight.
- Subtract the estimated weight of any occupants from the payload capacity to determine how much can be placed in the bed.
- Consult Honda's official specifications for your model year to confirm the value and any year-specific caveats, such as optional equipment or towing configuration.
In practice, always keep the total load (passengers plus cargo) at or below the stated payload and secure cargo properly to avoid shifting during operation.
Practical loading guidelines
When loading the bed, consider distribution, tie-downs, and obvious hazards:
- Place heavier items toward the center and as low as possible to maintain stability.
- Distribute weight evenly to avoid rear or front bias that could affect steering.
- Secure all items with appropriate ties and check before driving.
By following these guidelines and staying within the payload rating, you can maximize safe bed loading for your Ridgeline.
Summary
The Honda Ridgeline's bed payload generally sits in the 1,400–1,580 pound range across recent years, with exact numbers differing by year, trim, and options. To know your precise limit, read the data plate and reference the owner's manual, then load with occupants in mind and secure items properly. For everyday use, plan for a conservative load and verify safety guidelines for your specific vehicle.
How much weight can a Ridgeline hold?
Each trim boasts a robust Honda Ridgeline tongue weight of 600 pounds and a maximum towing capacity of 5,000 pounds when properly equipped.
Can you fit a 4x8 sheet of plywood in a Honda Ridgeline?
It's interesting that a lot of full sized trucks can't lay a 4x8 sheet flat between the wheel wells but my midsized Honda Ridgeline can. The Ridgeline is 50 inches between the wheel wells and has 1 inch on each side to spare.
How much weight can I put in the back of a Honda Ridgeline?
The 2023 Honda Ridgeline RTL-E and Black Edition have a maximum payload capacity of 1,509 pounds; 1,544 pounds on the RTL; and 1,583 pounds on the Sport.
How much weight can you put in the bed of a Ridgeline?
Payload is what you can put in the truck bed and cabin. Towing capacity is what you can pull behind the truck. The Ridgeline offers 1,580 pounds of payload capacity across all models.
