What kind of oil does a Toyota Fortuner take?
The Fortuner typically uses fully synthetic engine oil in viscosities around 0W-30 or 5W-30, but the exact grade depends on the engine variant and climate. Always follow the owner’s manual or a dealership recommendation.
Why the answer isn’t one-size-fits-all
Because Fortuner models use different engines across regions and model years, there isn’t a single universal oil specification. The oil you need depends on the engine code (for example diesel 2KD-FTV or 1GD-FTV, or petrol 2TR-FE), the climate, and Toyota’s service guidelines for your vehicle.
Common Fortuner engine options by market
Below are representative engines found in different regions. Use the owner's manual for the exact grade and spec for your vehicle.
- Diesel 2.5L (2KD-FTV/1KD-FTV): uses fully synthetic oil; typical guidance points to 5W-30, but check the manual for your model year.
- Diesel 2.8L (1GD-FTV): also uses fully synthetic oil; viscosities commonly range around 0W-30 to 5W-30 depending on climate and year.
- Petrol 2.7L (2TR-FE): generally uses 5W-30 synthetic oil per many regions’ Toyota guidelines.
Note that exact viscosity and specifications can vary; consult your manual or dealer for the precise requirement for your Fortuner variant.
How to verify the correct oil for your Fortuner
Follow these steps to confirm the exact oil grade and specification for your vehicle:
- Check the owner's manual or the oil specification sticker in the engine bay for the recommended viscosity (for example, 0W-30 or 5W-30) and any API/ACEA ratings.
- Look for the Toyota specification referenced in your manual (it may mention Toyota Genuine Motor Oil or a specific API/ACEA rating supported by Toyota engines).
- If in doubt, contact a Toyota dealer or a qualified technician who can confirm the correct grade for your engine code and climate.
Using the correct grade helps ensure proper lubrication, fuel efficiency, and warranty compliance.
Oil capacity, change intervals, and additional tips
Oil capacity and service intervals vary by engine. Most Fortuner variants take roughly 5–7 liters of oil when including a filter change. Typical change intervals are around 10,000–15,000 kilometers (6,000–9,000 miles) under normal driving with synthetic oil, and more frequent changes under severe conditions or when using conventional oil.
Always reset any service interval indicators after an oil change and follow the factory service schedule.
Bottom line
The Toyota Fortuner’s oil specification is not universal; it depends on engine type, market, and climate. In most modern Fortuners, expect to use a fully synthetic oil in the 0W-30 to 5W-30 range, but verify with your owner’s manual or Toyota dealer for your exact model-year engine code.
Summary
Summary: The Fortuner can take synthetic oil of varying viscosities depending on engine and climate. The safest approach is to consult the owner’s manual or a Toyota service professional to determine the precise grade and specification for your vehicle, typically 0W-30 or 5W-30, and to follow recommended service intervals to maintain performance and warranty coverage.
