How wide is a 57 Chevy trucks rear end?
The 1957 Chevrolet truck is a classic vehicle that holds a special place in the hearts of car enthusiasts and collectors alike. One of the key specifications that many owners and restorers are interested in is the width of the rear end. This measurement is crucial for various reasons, including compatibility with aftermarket parts, suspension upgrades, and overall restoration accuracy. In this article, we will explore the dimensions of the rear end of a 57 Chevy truck and why this information is essential for any restoration project.
Dimensions of the 57 Chevy Truck Rear End
The rear end width of a 1957 Chevy truck typically measures around 60 inches. This measurement can vary slightly depending on the specific model and any modifications that may have been made over the years. Understanding this width is vital for several reasons:
- Compatibility with Wheels: Knowing the rear end width helps in selecting the right wheels and tires that will fit properly without rubbing against the body or suspension components.
- Suspension Upgrades: If you're considering upgrading the suspension, the rear end width will determine the type of suspension system that can be installed.
- Restoration Accuracy: For those restoring a 57 Chevy truck to its original specifications, having the correct rear end width is essential for maintaining authenticity.
Factors Affecting Rear End Width
While the standard width is around 60 inches, several factors can influence this measurement:
- Model Variations: Different models of the 57 Chevy truck may have slight variations in rear end width.
- Aftermarket Modifications: Many owners modify their trucks, which can change the rear end width.
- Wear and Tear: Over time, components can wear down or be replaced, potentially altering the original dimensions.
Conclusion
In summary, the rear end width of a 57 Chevy truck is approximately 60 inches, but it's essential to consider the specific model and any modifications that may have been made. Whether you're restoring a classic truck or upgrading its components, having accurate measurements will ensure a successful project. If you have any further questions about your Chevy truck or need assistance with maintenance and repairs, feel free to reach out to us at Kevin's Autos!
Frequently Asked Questions
What are the dimensions of a 57 Chevy?
Torque: 210 ft-lb, 285 Nm. Length: 200 in. Width: 73.9 in. Height: 58.3 in.
What is the width of the rear end of a 1953 Chevy?
This is the measurement of the distance between the rear wheels (wheel to wheel) and is made at the center of the tire. The measureent on all 1949-1953 cars was the same at 58 3/4" which was 1 and 1/4" narrower than the 1941-1948 models.
How wide is the back of a Chevy Silverado?
A Chevy Silverado with the Regular Cab and 6.5-foot bed is 210.9 inches long, 81.1 inches wide, and 75.7 inches tall with two-wheel drive (or 75.8 inches with four-wheel drive). If you opt for a Crew Cab model with the same box, it will be 241.4 inches long, 81.2 inches wide, and 75.4 inches tall.
How wide is a 7.5 GM rear end?
Overall width 59.625".
How can you tell the difference between a GM 7.5 and 8.5 rear end?
The large square lugs on the bottom of the pumpkin are a hint that this is an 8.5” unit and not an 8.2 or 7.5. The 7.5 has lugs in this position, but they are exceedingly small. With so many potential sources, an 8.5/8.6 GM-10 bolt axle is not a challenging thing to find.
How wide is a 57 Chevy truck rear end?
A stock 57 rear end is 60" mounting surface to mounting surface.
How wide is a 1956 Chevy truck's rear end?
55-57 Chevy is 60-1/4". The Camaro will kind of work but it will require 1" more backspacing on the wheels.
How wide is the back of a truck?
Most new trucks have bed widths that tend to fall between 55 to 65 inches, with only around 10 inches of difference between the widest and narrowest truck beds. The width of your truck bed ultimately depends on the model of your vehicle and the type of truck it is.
What is the width of a 1955 Chevy rear end?
Stock 55 - 57 is 60 1/4". I used one from a 1969 Mustang in stock form measuring 59 1/4".
How wide is a 1964 Chevy truck?
Chevrolet C/K (first generation)
| First generation | |
|---|---|
| Dimensions | |
| Wheelbase | 115 in (2,921 mm) (short box: 1⁄2-ton models) 127 in (3,226 mm) (long box: 1⁄2-ton & 3⁄4-ton models) 133 in (3,378 mm) (1-ton models) |
| Length | 186.875 in (4,747 mm) SWB 206 in (5,232 mm) Standard 216.25 in (5,493 mm) LWB |
| Width | 78.75 in (2,000 mm) |
