Is Subaru 5x100?
Yes. The majority of Subaru's modern passenger cars and crossovers use a 5x100 bolt pattern. That means five lug holes arranged on a 100 mm circle. There are rare exceptions depending on model year and market, so it’s important to verify your specific vehicle’s specs before buying wheels.
Understanding bolt patterns helps you avoid ill-fitting wheels when upgrading or replacing wheels. This guide explains what 5x100 means, which Subaru models most commonly use it, and how to verify the pattern for your car.
What does 5x100 mean for Subaru?
The number pair in 5x100 describes two things: the number of lug holes (five) and the diameter of the circle that the lug holes form (100 millimeters). For Subaru, this pattern is widely used on most modern models, making wheel upgrades easier across many trims. The exact center bore and offset requirements vary by model, so you should confirm those specs for your vehicle.
Which Subaru models typically use 5x100?
The following models are commonly equipped with a 5x100 bolt pattern, reflecting Subaru's modern lineup. However, always verify for your exact year and market, as there can be exceptions.
- Subaru Impreza (including the hatchback and sedan variants) and related WRX/WRX STI versions
- Subaru Forester (recent generations)
- Subaru Legacy
- Subaru Outback (modern generations)
- Subaru Crosstrek (XV)
- Subaru BRZ
These examples illustrate the breadth of Subaru's current lineup that commonly uses 5x100. Independent model years and regional variations can still apply, so checking official spec sheets is recommended.
How to verify your wheel bolt pattern?
Before purchasing wheels or tires, confirm your car's exact bolt pattern using trusted sources and measurements. The steps below guide you through a reliable check.
- Consult the owner's manual or the official Subaru spec sheet for your exact model and year.
- Check the wheel specification displayed on the factory wheel or inside the door jamb sticker for the vehicle’s data plate.
- Measure the bolt circle diameter (BCD): locate two lug holes on opposite sides of the circle and measure the distance between their centers; for a five-lug pattern, the distance will be around 100 mm in a 5x100 setup.
- Count the number of lug holes; confirm there are five, not four or six.
- Verify hub bore size and offset requirements to ensure proper seating and clearance for aftermarket wheels and braking components.
Following these steps helps ensure that wheels and tires will fit without modification and that safety and performance are maintained.
Summary
For Subaru, the 5x100 bolt pattern covers most current models, including Impreza, Forester, Legacy, Outback, Crosstrek, and BRZ. Always confirm the exact pattern for your year and market, as there can be rare exceptions. When in doubt, consult the vehicle’s official specifications or a trusted wheel shop to avoid fitment issues.
When did Subaru change from 5x100 to 5x114 3?
Before 2015, almost all were, minus the STI's from 2006-2014. In 2015, Subaru went with 5x114. 3 for the WRX and STI both.
What bolt pattern is Subaru?
Subaru uses multiple bolt patterns, but the most common are 5x100 and 5x114.3. Generally, older models and some smaller cars use the 5x100 pattern, while many newer SUVs and performance models use the 5x114.3 pattern. For example, many Impreza and Forester models use 5x100, while newer WRX, STI, and Outback models often use 5x114.3.
Common Subaru bolt patterns
- 5x100: This is a very common pattern for many Subaru models, including older Imprezas, Legacys, and Foresters.
- 5x114.3: This pattern is found on many newer performance vehicles and SUVs, such as the current WRX, STI, Outback, and Crosstrek.
How to be sure
- Check your specific vehicle: The exact bolt pattern depends on the model and year. For example, many Outback models switched from 5x100 to 5x114.3 around 2015.
- Consult your owner's manual: Your owner's manual will have the most accurate information for your vehicle.
Which subarus are 5x100?
Subaru: Many models, including the Subaru Impreza (non-STI versions), Legacy, and Forester, use the 5x100 bolt pattern. These vehicles are known for their all-wheel-drive capabilities and benefit significantly from a uniform wheel setup.
What cars have a 5x100 lug pattern?
Many cars from brands like Subaru, Toyota, Volkswagen, and Chrysler have a 5x100 lug pattern, including models such as the Subaru Impreza, Forester, and Legacy; Toyota Celica and Corolla; Volkswagen Golf, Beetle, and some Jetta versions; and the Chrysler PT Cruiser. This common bolt pattern was often used on many compact and sportier vehicles, especially from the late 1980s through the early 2010s.
Subaru
- Impreza (non-STI versions)
- Forester
- Legacy
- Outback
- WRX (older models)
- BRZ
Toyota
Celica, Corolla (specific models and years), Scion tC, and Prius.
Volkswagen
Golf (specific models and years), Beetle, Jetta (specific models and years), and Passat (specific models and years).
Chrysler
PT Cruiser (sedan and convertible), Sebring (specific models and years), Cirrus (specific models and years), and Neon (5-lug).
Other makes
Audi TT (2000-2006), Pontiac Grand Am, Chevrolet Cavalier, and Buick Century.
