What car has a 62TE transmission?
The 62TE is not a single-model designation; it’s a six-speed automatic transmission used in a small group of vehicles from different brands, with its strongest historical footprint in some Chrysler group minivans and select Hyundai/Kia models from the mid-2000s.
In this article, we explain what the 62TE is, where it has shown up, and how to verify if your specific car uses this transmission. We also offer guidance on identification and maintenance considerations.
What is the 62TE?
The 62TE is a six-speed electronically controlled automatic transmission that appeared in a variety of front-wheel-drive and all-wheel-drive applications. Transmission codes like 62TE are used internally by manufacturers to designate specific gear-ratio sets and control systems and can appear in more than one model across different brands. The mapping from code to exact model-years can vary by market and production run.
Where it has appeared
The 62TE has been reported in a limited portfolio of vehicles across different brands, with its strongest historical footprint in certain Chrysler-group minivans and some Hyundai/Kia products from the mid-2000s. Because the same code can be used for different hardware in different regions, you should verify via the vehicle’s VIN, service manual, or a factory build sheet for precise application.
To help you navigate this, below are typical categories where this transmission has appeared historically. Individual model-year pairings can differ by market.
Vehicles and categories commonly associated with the 62TE
Note: The following examples represent broad categories where the 62TE has been noted in maintenance guides and owner forums. Check the VIN and production codes for your specific car to confirm.
- Chrysler group minivans and related crossovers from the early- to mid-2000s
- Hyundai and Kia mid-2000s sedans and crossovers in some regional markets
- Specialty or region-specific variations on front-wheel-drive platforms
In any case, the exact model-year pairing and whether your version uses the 62TE can be confirmed by a service portal lookup, the transmission tag under the hood, or the sticker on the inside of the glove box for the build data.
How to identify a 62TE in your vehicle
There are a few ways to verify the transmission code in your car:
- Check the transmission identification tag or case stamping, often located on the side of the transmission bell housing area.
- Consult the vehicle’s VIN with a dealer, service manual, or online VIN decoder that lists transmission type by model/year.
- Inspect maintenance records or the original window sticker (Monroney) if available, which may list the transmission option code.
Understanding the exact equipment installed in your car helps with maintenance, parts compatibility, and potential recalls.
Maintenance considerations for the 62TE
As with any six-speed automatic in that era, common concerns include serviceability of the transmission fluid, filter changes, and software updates for the control module. If you own a vehicle with a 62TE, follow the manufacturer’s service intervals for automatic transmission fluid (ATF) changes and seek a qualified technician for diagnostics if you notice slipping, harsh shifting, or delays in engagement.
Summary
The 62TE designation marks a specific six-speed automatic used across a limited set of models, rather than one single car. If you suspect your vehicle uses a 62TE, verify with the VIN, consult the service manual, or contact a dealer to confirm the exact transmission code and compatible parts. This will ensure accurate maintenance and parts compatibility for your vehicle.
For readers: If you have a particular model and year in mind, share it and I can help confirm whether that specific vehicle used the 62TE and outline maintenance considerations.
What does 62TE stand for?
The 62te automatic transmission is a six-speed transaxle that Chrysler developed primarily for front-wheel-drive vehicles. Introduced around 2007, it replaced older four- Page 6 and five-speed units to provide better fuel efficiency and improved driving dynamics through additional gear ratios.
Is the 62TE a good transmission?
The GM 62TE transmissions are generally reliable units, however they do have a few common issues to be aware of. These include: Solenoid failures. Torque converter clutch problems.
What vehicles have a 68RFE transmission?
The 68RFE transmission is primarily found in Ram 2500 and 3500 heavy-duty trucks equipped with the 6.7L Cummins diesel engine, typically from the 2007.5 model year onward. While its main application is in Ram trucks, it has also been used in other vehicles like the Jeep Grand Cherokee and some Chrysler models.
- Ram 2500 and 3500: This is the most common vehicle for the 68RFE transmission. It has been used in these models since the introduction of the 6.7L Cummins engine, which started in the 2007.5 model year.
- Other Chrysler vehicles: The 68RFE transmission is also found in other applications such as the Jeep Grand Cherokee and various Chrysler, Dodge, and Volkswagen models.
What vehicles use the 62TE transmission?
The Dodge 62TE transmission is found in several Chrysler, Dodge, and Ram vehicles, including:
- Dodge Grand Caravan (2007-2020)
- Chrysler Town & Country (2008-2016)
- Chrysler Pacifica (2017-present, non-hybrid models)
- Ram ProMaster 1500, 2500, 3500 (2014-present)
- Volkswagen Routan (2009-2014)
- Chrysler Sebring (2007–2010)
