What cars use the 4x108 bolt pattern?
The 4x108 bolt pattern—four lug holes on a circle 108 millimeters in diameter—is most commonly found on vehicles from the PSA Group, particularly Peugeot and Citroën models, with occasional appearances in other brands. This pattern is popular in certain PSA-era hatchbacks and sedans, but year, market, and trim can affect exact fitment.
In practice, this pattern is a specialization within the broader world of wheel fitment. While many people associate it with PSA products, variations can occur from generation to generation, and some non-PSA vehicles may use it in limited markets or with aftermarket wheels. For drivers, the key is to confirm the exact bolt pattern, center bore, and offset for your vehicle before purchasing wheels or adapters.
Common PSA Group vehicles that use 4x108
The following representative PSA-era models are frequently listed in wheel-fitment databases as using the 4x108 pattern. These examples illustrate the type of cars where 4x108 wheels are commonly sought, though specifics can vary by year and market.
- Peugeot 206 (late 1990s to early 2010s)
- Peugeot 306 (1990s to early 2000s)
- Peugeot 307 (early to late 2000s)
- Peugeot 406 (mid-1990s to early 2000s)
- Citroën Xsara (late 1990s to early 2000s)
Note: Even within these models, wheel fit can vary by year, trim, and market. Always verify the exact PCD (pattern), center bore, and offset for your specific vehicle before buying wheels.
How to verify wheel compatibility
To determine whether a wheel or adapter will fit your car’s 4x108 bolt pattern, follow these steps. This practical checklist helps prevent misfits and safety issues.
- Check the vehicle’s documentation or the factory wheel specification label for the bolt pattern (PCD). Look for “4x108” or “4x108mm.”
- Measure or confirm the lug spacing on your current wheels (the distance between lug centers). If you don’t have the original wheels, measure from the center of one lug hole to the center of the opposite lug hole across the wheel.
- Confirm the wheel center bore size on both the hub and the new wheels. A proper center bore match reduces the risk of mounting errors and vibration.
- Verify the wheel offset (ET) and width match your vehicle’s suspension geometry and fender clearance. Mismatched offset can cause rubbing or handling changes.
- Consult the wheel manufacturer or a reputable tire shop to confirm compatibility for your specific year, trim, and market. When in doubt, seek professional advice.
If you still aren’t sure after these checks, contact a dealer, a certified tire/wheel shop, or the vehicle’s manufacturer for precise guidance.
Summary
The 4x108 bolt pattern is mainly associated with PSA Group vehicles such as Peugeot and Citroën models from the late 1990s through the 2000s, with a few other brands appearing in certain markets. When considering 4x108 wheels, always verify the exact bolt pattern, center bore, and offset for your specific vehicle and generation, and consult a professional if you’re uncertain.
