What engine is in the 1980 Toyota Corona?
The 1980 Toyota Corona did not use a single engine; its powerplant depended on the market and trim. The most common engine for that year was a 1.6-liter inline-four, with 1.8- and 2.0-liter options offered in some regions.
This article explains how engine choices varied by market for the 1980 Corona, describes the overall landscape of the powerplants used, and notes how fuel systems and availability differed by country and model grade.
Engine options by market
Below are the general engine options you could encounter on a 1980 Corona, organized by market; exact availability depended on the country and specific model year within that year.
- Japan and domestic markets: typically a 1.6-liter inline-four from the 4K family, with some higher-spec or later models offering a larger 1.8-liter variant and, in certain trims, early fuel-injected systems.
- North America and Europe: several markets offered a 1.8-liter or 2.0-liter inline-four in higher trims, with carbureted setups common early in the era and fuel injection appearing on select models later in the decade.
- Australia and other overseas markets: a mix of 1.6- and 1.8-liter engines was common, with some imports/special trims offering a 2.0-liter option for extra performance or torque.
In summary, the 1.6-liter engine served as the baseline for many regions, while larger 1.8-liter and 2.0-liter options appeared in various markets and trims depending on local demand and regulations.
Regional details
Japan
In the Japanese domestic market, the 1980 Corona lineup usually featured the 1.6-liter inline-four from the 4K family for base grades, with 1.8-liter variants available on higher-spec models. Some late-production cars in this era transitioned to fuel-injected systems, depending on the exact year and trim.
North America and Europe
For North American and European customers, engine choices often leaned toward 1.8- to 2.0-liter inline-fours in higher trims. Carbureted installations were common earlier in the model year, with fuel injection introduced on select versions as emissions standards evolved.
Australia and other markets
Australian and other regional markets commonly offered 1.6- and 1.8-liter engines, with 2.0-liter options appearing in certain imports or region-specific trims to balance performance and local requirements.
Summary
The 1980 Toyota Corona encompassed a range of inline-four engines from about 1.6 to 2.0 liters, with regional differences shaping which exact engine was installed in a given car. If you can specify the country or exact model year within 1980, I can narrow the engine details to that particular version.
Is Toyota Corona a good car?
It won Road Test's 1969 Import Car of the Year Award. n 2014, editors at Car and Driver called the Corona one of the best Toyotas ever made, saying Toyota survived long enough to thrive in America because of the Corona.
What engine does a 1980 Toyota pickup have?
The 2.2-liter 20R motor is the part of the engine family on which Toyota has built their reputation for reliability. It looks quite honest and original. You will spot a Davis United Ignition performance distributor, and that helps this hardy Toyota fire up with the robustness you really want on a pickup like this.
How much horsepower does a 1980 Toyota Corolla 1.8 have?
North American market engines: 3T-C — 1.8 L (1,770 cc) I4, 8-valve Pushrod, carb, 75 hp (56 kW)
How big is a 1980 Toyota Corona?
The Toyota Corona 1980 has 12 variants. The length ranges from 4210 to 4570mm, the height ranges from 1390 to 1420mm and the width ranges from 1610 to 1660mm.
