What has a 5x115 bolt pattern?

Not many vehicles use a 5x115 bolt pattern; it’s a relatively rare lug arrangement found only on a small number of models and certain aftermarket setups. If you’re shopping for wheels, verify the pattern on your specific vehicle before buying.

What is a 5x115 bolt pattern?

A 5x115 bolt pattern describes a five-lug wheel mounting arrangement with a bolt circle diameter of 115 millimeters. This pattern is similar in concept to more common patterns like 5x114.3 or 5x120, but it is significantly less widespread. Important considerations alongside the bolt circle include the hub bore size, offset, and caliper clearance. Wheels with a 5x115 pattern may require hub-centric rings if the hub bore is larger than the wheel bore to ensure proper alignment and reduce vibration.

Which vehicles have used 5x115 bolt patterns

Below is a general guide to the kinds of vehicles that have appeared with 5x115 patterns. The list is not exhaustive and varies by market and production year. If your exact car isn’t listed, confirm with a dealer, the manufacturer, or a wheel specialist.

• Rare or niche vehicles: The 5x115 pattern tends to show up in limited-production models or in markets outside North America where alternative wheel standards are more common.


• Aftermarket and conversions: Some enthusiasts and shops select 5x115 wheels for custom builds or conversions, sometimes using adapters or rings to address hub bore differences.


• Older European and specialty models: A handful of European luxury or performance vehicles from earlier decades have appeared with unusual lug patterns, including 5x115 in certain configurations.

Because bolt patterns can vary by year, trim, and market, always verify the exact pattern for your vehicle’s year, make, and model before purchasing wheels or adapters. Hub bore, offset, and caliper clearance are critical factors in determining fitment.

How to verify a 5x115 pattern on your vehicle

Here are practical steps to confirm whether a car or wheel set uses 5x115:

1. Measure the bolt circle diameter: identify five lug holes, measure the distance between opposite holes, and convert to millimeters (approximately 115 mm).


2. Count lug holes: ensure there are five lug studs/holes.


3. Check the hub bore size and type: a hub-centric ring may be required if the wheel bore is larger than the vehicle’s hub bore.


4. Consult official specifications: owner’s manual, manufacturer websites, or dealer service bulletins often list the correct bolt pattern.


5. Use reliable fitment resources: wheel retailers and fitment databases may list 5x115 as a pattern for specific models and years; cross-check with your exact vehicle configuration.

Verifying each factor will help determine if a 5x115 setup is appropriate for your vehicle. If in doubt, seek an in-person assessment from a wheel specialist to avoid fitment issues.

Summary

The 5x115 bolt pattern remains a rarity in modern production vehicles, surfacing mainly in niche European models or in aftermarket conversions. For most buyers, more common patterns such as 5x114.3, 5x112, or 5x120 will be the norm. If you’re exploring wheels in this pattern, gather exact measurements and consult experts to ensure proper fitment and safe operation.

If you have a specific make, model, and year in mind, I can look up the exact compatibility for that vehicle and provide a more targeted list of wheels that fit.

What Dodge has a 5x115 bolt pattern?

Vehicles That Use the 5x115 Bolt Pattern (Examples)
Popular Dodge and Chrysler platforms include the Charger, Challenger, Magnum, and Chrysler 300.

What cars fit a 5x115 bolt pattern?

Bolt pattern 5x115 What cars have a 5x115 bolt pattern?

• Allure 2005-2009.
• Cascada 2016-2019.
• Century 1982-2005.
• Electra 1985-1990.
• Encore 2020-2026.
• Encore GX 2020-2026.
• Encore Plus 2023-2025.
• Envision 2014-2018.

What is the same as 5x115?

A 5x115 bolt pattern is also known as 5x4.52 inches or simply 5x4.5 (due to rounding). It is commonly interchangeable with the 5x114.3mm (5x4.5 inch) pattern, especially on vehicles from different manufacturers that were historically designed for one or the other, but it's essential to check the specific vehicle's requirements to ensure a proper and safe fit. 
5x115 bolt pattern equivalents

• Inches: The most common conversion is to 5x4.52 inches, but it is often referred to as 5x4.5. 
• Commonly used on: This pattern is found on many American vehicles from manufacturers like Buick, Cadillac, Chevrolet, Dodge, and Pontiac. 
• Interchangeability with 5x114.3: While the two patterns are very close (a difference of only 0.7mm), they are not perfectly interchangeable. 
  • Potential issues: Using a 5x114.3 wheel on a 5x115 hub can create a slight but significant play, which can cause a variety of problems ranging from vibrations to serious safety issues. 
  • Modifications: Some users have successfully fitted 5x114.3 wheels on 5x115 hubs after making modifications to the hub or wheel, but this is not recommended for regular use and can void your vehicle's warranty. 

Recommendation: Always confirm your vehicle's exact bolt pattern before purchasing new wheels to ensure a proper and safe fit.

Is 5x115 and 5x114 3 the same bolt pattern?

The 5x115 and 5x114.3 bolt patterns are very similar, differing by only 0.7mm0.7 m m0.7𝑚𝑚, so wheels can sometimes be mounted interchangeably, but it is not recommended without precautions. The difference is small enough that it is often within manufacturing tolerances, but using a wheel with the incorrect bolt pattern can cause vibrations or poor fitment if not installed correctly. To properly install, you must use hub-centric rings to center the wheel and tighten the lug nuts in stages using a star pattern to the correct torque specification. 
Key differences

• Bolt pattern: 5x114.3 is a common size for many Japanese and some American cars, while 5x115 is a common size for many Dodge, Chrysler, and GM vehicles. 
• Measurement: The difference is just 0.7mm0.7 m m0.7𝑚𝑚 (0.0280.0280.028 inches), which is very small. 
• Interchangeability: They can be physically mounted, but doing so without proper centering can lead to improper fitment and potential damage. 

How to ensure a proper fit

• Use hub-centric rings: These are crucial for centering the wheel on the hub, as the difference in bolt patterns can cause the wheel to be off-center during tightening. 
• Tighten lug nuts correctly: Always tighten lug nuts in stages using a star pattern, and torque them to the manufacturer's specifications. 
• Consult a professional: If you are unsure, have a competent mechanic or tire professional check the fitment to ensure it is safe and correct for your specific vehicle. 

You can watch this video to learn about the compatibility of 5x114.3 wheels on a 5x115 bolt pattern: 33sAuto AlmanacYouTube · Mar 7, 2023