What is Dodge 5 lug bolt pattern?
There is no single Dodge 5-lug bolt pattern; it varies by model and year. The patterns you’ll encounter most often include 5x100 mm, 5x114.3 mm (5 on 4.5 inches), and 5x115 mm (5 on 4.53 inches).
Because wheel fit depends on more than just the bolt circle, you should verify the exact dimensions for your specific vehicle (year, trim, and suspension) before buying wheels or tires. This article explains what the Dodge 5-lug bolt pattern is, why patterns vary, and how to confirm yours across different Dodge models.
What a five-lug bolt pattern means
A five-lug bolt pattern (also called a bolt circle) specifies the number of lug holes and the diameter of the imaginary circle that passes through the centers of those holes. For five-lug wheels, common measurements are described as 5x100, 5x114.3, or 5x115, among others. The exact pattern determines which wheels will bolt up properly to your hub; even a small mismatch can cause improper seating, vibration, or safety concerns.
Common Dodge 5-lug patterns
Below are the patterns you’re most likely to encounter on Dodge vehicles. Patterns vary by model and year, so always confirm for your specific car.
- 5x100 mm (5 on 4.0 inches)
- 5x114.3 mm (5 on 4.5 inches)
- 5x115 mm (5 on 4.53 inches)
These patterns cover a wide range of Dodge passenger cars and some SUVs from different eras. It’s important to note that even if two vehicles share a similar bolt pattern, other factors such as hub bore size, thread pitch, and offset can affect wheel fit. Always verify all dimensions for your exact vehicle configuration.
How to verify your Dodge bolt pattern
Before you buy wheels or tires, confirm the bolt pattern using reliable sources and accurate measurements. The following steps help ensure you don’t buy the wrong wheels.
- Check the vehicle’s documentation or the sticker on the driver's door jamb for the listed bolt pattern and hub bore information.
- Consult the manufacturer’s website or a dealership with your VIN to confirm the exact pattern for your exact model and year.
- Measure the bolt circle yourself: measure from the center of one lug hole to the center of the opposite lug hole across the hub to obtain the diameter; ensure you’re measuring the correct configuration (five lugs).
- Compare with wheel specs from reputable retailers or wheel manufacturers to verify compatibility, including center bore and thread pitch.
- If there is any doubt, seek professional help from a tire/wheel shop or the vehicle manufacturer.
Correct verification helps prevent fitment issues such as misalignment, vibration, or clearance problems with brake calipers and suspension components.
Other dimensions that matter when swapping wheels
Beyond the bolt pattern, several related factors influence whether a wheel fits cleanly on a Dodge vehicle. These include center bore size, wheel offset (ET), width, and the rotor/caliper clearance. Even two wheels with the same bolt pattern can differ in how far they sit in or out from the hub, which affects handling, braking performance, and tire rubbing. Always validate these dimensions in combination with the bolt pattern.
Summary
For Dodge vehicles, the 5-lug bolt pattern is not universal. The most commonly encountered patterns are 5x100, 5x114.3, and 5x115, but variations exist across different models and production years. Always verify the exact bolt circle, center bore, thread size, offset, and clearance for your specific vehicle before purchasing wheels. When in doubt, consult official sources or a qualified tire and wheel professional to ensure safe, proper fitment.
Quick takeaway
Know your Dodge model and year, verify the bolt pattern through official documentation or a reliable retailer, and check additional fitment details (center bore, offset, and clearance) to ensure wheel compatibility.
