What is included in Acura B12 service?
Acura B12 is the B-level maintenance service at roughly 12 months or 12,000 miles; it typically includes an oil change and filter, tire rotation, brake inspection, fluid level checks and top-offs, and a multi-point inspection, with the maintenance minder reset.
Understanding B12 within Acura maintenance
Acura uses a Maintenance Minder system to guide service intervals. The B12 designation identifies a mid-cycle service that goes beyond the basic A-service, aligning with the one-year/12,000-mile interval for many vehicles. The exact items can vary by model year and trim, so it is important to verify with your dealer or owner's manual for your specific car.
Items typically included in Acura B12 service
The following items are commonly performed as part of a B12 service. Exact inclusions may vary by model and region, so use this as a general guide and confirm with your dealer.
- Engine oil and oil filter replacement
- Tire rotation
- Brake system inspection (pads, rotors, and overall brake function assessment)
- Multi-point vehicle inspection covering key components and systems
- Fluid level checks and top-offs (engine coolant, brake fluid, transmission/ATF where applicable, power steering fluid, windshield washer fluid)
- Battery test and charging system inspection
- Cabin air filter replacement (if required by the vehicle’s maintenance minder or mileage)
- Engine air filter replacement (if required by the maintenance minder or inspection findings)
- Reset of the Maintenance Minder or service indicator
These steps help ensure the vehicle remains reliable and safe, addressing routine wear-and-tear items and confirming that core systems are functioning properly at the annual/12,000-mile mark.
Variations by model, year, and region
Not all items are mandatory on every Acura model or in every market. Some vehicles may require additional checks or replacements based on their specific design, equipment, or the maintenance minder recommendations. Always consult your owner's manual or your local Acura dealer for the exact B12 package for your car.
How to verify what your car’s B12 includes
To confirm the precise inclusions for your vehicle, review the Maintenance Minder codes in your dashboard, check the service section of your owner’s manual, and ask your Acura dealer or service adviser for a written list of items included in the B12 service for your model/year. The service invoice will typically itemize each action performed during the visit.
Conclusion
In short, Acura B12 service is a mid-cycle maintenance visit designed to address essential oil maintenance, tire health, safety-related inspections, and system checks at the 12-month/12,000-mile interval. While the core elements are consistent, exact items can vary by model and region, so always verify with your dealer for your specific vehicle.
Summary
Acura B12 combines an oil change, tire rotation, brake and multi-point inspections, fluid checks, and system maintenance at the annual/12,000-mile milestone. Understanding exactly what’s included for your vehicle ensures you stay ahead of wear and keep your Acura performing at its best.
Does B12 service include tire rotation?
What does Honda B12 maintenance code mean? B12 codes indicate that your Honda needs an engine oil and filter change along with a tire rotation and replacement of both the engine air filter and cabin air filter.
What is the service B12 on Acura?
Acura "B 1 2" service indicates your vehicle needs a combination of maintenance items based on the Maintenance Minder system. The "B" signifies an oil and filter change plus a multi-point inspection. The "1" means you need a tire rotation, and the "2" requires replacement of the air cleaner element and the dust and pollen filter, along with an inspection of the drive belt.
B service (Main Service)
- Engine oil and filter replacement
- Comprehensive inspection of major components, including:
- Brakes (including parking brake adjustment)
- Front and rear brakes
- Suspension components
- Driveshaft and its boots
- Exhaust system
- Fluid levels and condition
- Fuel lines and connections
- Steering gearbox
- Tie rod ends
- Tire repair kit expiration date (if equipped)
1 sub-code
tire rotation.
2 sub-code
Air cleaner element replacement, Dust and pollen filter replacement, and Drive belt inspection.
What is B12 service for Acura?
The B12 service code means: B = Change engine oil and oil filter, inspect front and rear brakes, check parking brake adjustment, and other inspections. 1 = Rotate the tires, check tire pressure and condition. 2 = Replace dust/pollen filter, check drive belt, replace air filter and cabin air filter element.
How much is service for Acura B12?
The cost for an Acura B12 service typically ranges from $200 to $400, though it can vary based on the dealership, your vehicle's model, and location. The B12 service includes an engine oil and filter change, tire rotation, engine air filter replacement, and cabin air filter replacement, along with a multi-point inspection and fluid checks.
What's included in B12 service
- Engine oil and filter change: Uses genuine Acura oil and parts.
- Tire rotation: Improves tire wear.
- Engine air filter replacement: Replaces the air filter for the engine.
- Cabin air filter replacement: Replaces the filter that cleans the air coming into the cabin.
- Comprehensive multi-point inspection: This includes checking brakes, suspension, steering, exhaust, fluids, and other key components.
- Battery test: Checks the condition of the battery.
How to get a more accurate cost
- Check with your local Acura dealer: The exact price will depend on the specific dealership and your car's model and year.
- Request a detailed service list: Before you agree to the service, ask for a breakdown of all the work that will be done to avoid being overcharged.
