What is the bolt pattern for a 2000 Ford Mustang?
The bolt pattern for a 2000 Ford Mustang is 5-lug on a 114.3 mm circle (5x114.3 mm, or 5x4.5 inches).
The 2000 Mustang, part of the SN95 generation, uses a 5x114.3 bolt circle across the model line. This means most wheels designed for late-1990s to early-2000s Mustangs will bolt up, and it aligns with the same basic pattern used by many later models as well. The hub bore for this era is typically 70.0 mm, and users should verify clearance with their brake components and wheel offsets. When mixing wheels from different generations, hub-centric rings or adapters may be needed to ensure proper fitment and center alignment.
Bolt pattern basics
Here are the essential facts that determine whether a wheel will fit a 2000 Mustang.
- Pattern: 5-lug, 114.3 mm bolt circle (5x4.5 inches)
- Number of bolts: 5
- Center bore: 70.0 mm (approximately 2.75 inches)
- Compatibility notes: Suitable for 1999–2004 SN95 Mustangs; many aftermarket wheels in this pattern will fit, though you should confirm hub bore and offset compatibility for your specific setup. Hub-centric rings may be needed for proper alignment with wheels from other generations.
These points help guide wheel selection and ensure proper fitment when upgrading or replacing wheels on a 2000 Mustang.
Summary
In summary, your 2000 Ford Mustang uses a 5x114.3 bolt pattern with a 70.0 mm center bore. This is the standard for the SN95 era and remains a common target for aftermarket wheels, making wheel swaps feasible with appropriate checks for hub bore and offset.
