What is the bolt pattern for a Honda Odyssey?
The bolt pattern for a Honda Odyssey is most commonly 5 on 114.3 mm (5x114.3) with a center bore around 64.1 mm. Always confirm your exact year and trim to be sure.
In practical terms, the bolt pattern (PCD) describes how many lug studs the wheel uses and the diameter of the circle those studs form. For most Odysseys, this means a 5-lug setup on a 114.3 mm circle, which is a common specification across many Honda models. However, regional variations and specific trims can differ, so it’s important to verify against your vehicle’s documentation or a trusted parts database.
Bolt pattern basics
Before diving into the specifics for the Odyssey, it helps to understand the core terms used when talking wheels and adapters.
Key terms
- Bolt pattern (PCD): number of lug studs and the circle diameter they form.
- Center bore: the hole in the wheel that centers it on the hub.
- Lug size and thread pitch: the size and thread of the lug bolts or nuts.
Honda Odyssey bolt pattern by generation
The vast majority of Honda Odyssey models sold in North America use a 5-lug pattern on a 114.3 mm circle, with a center bore near 64.1 mm. Always check the owner’s manual or the driver-side door placard for your exact vehicle’s specs, since there can be regional variations or changes in specific trims.
- Bolt pattern: 5 lugs on a 114.3 mm circle (5x114.3)
- Center bore: typically 64.1 mm
- Lug size: usually M12 x 1.5
- Seat type: commonly 60-degree conical (taper) seat
Conclusion: For most Odysseys, use a 5x114.3 mm bolt pattern as the baseline, and verify center bore and lug details for your exact model year and market.
Common wheel specs and compatibility
When shopping for wheels, it helps to know the typical accompanying specs that affect fit and safety.
- Bolt pattern: 5x114.3 mm
- Center bore: 64.1 mm
- Lug size and thread pitch: M12 x 1.5
- Seat type: 60-degree conical
- Common wheel offset: roughly +40 to +45 mm (range can vary by model and year)
Conclusion: Use these baseline specs to narrow wheel options, but always confirm exact figures for your Odyssey’s year and trim. If you use aftermarket wheels with a larger bore, hub-centric rings may be needed to ensure proper centering.
How to verify compatibility for your specific Odyssey
To be sure a wheel will fit, follow these steps.
- Check the owner’s manual or the placard on the driver’s door jamb for the precise PCD, center bore, and lug size for your vehicle.
- Measure the bolt pattern if you’re unsure: across two opposite studs, the distance should be 114.3 mm.
- Measure the hub bore on the vehicle and compare to the wheel bore; if the wheel bore is larger, consider hub-centric rings.
- Verify offset and clearance: ensure the wheel offset won’t cause rubbing with the brake components or fenders.
- When in doubt, consult a tire and wheel professional or use a reputable wheel-fitment database that lists your VIN.
Conclusion: Accurate measurements and proper centering are essential for safe wheel installation on a Honda Odyssey.
Summary
The Honda Odyssey’s standard bolt pattern is 5x114.3 mm with a center bore of about 64.1 mm, and lug hardware typically uses M12 x 1.5 with a 60-degree conical seat. This baseline covers most US and many global Odysseys, but always verify against your vehicle’s specific year, trim, and market to ensure proper fitment. When replacing wheels, confirm PCD, center bore, lug size, seat type, and offset to avoid fitment issues, and consider hub-centric rings if the wheel bore does not match your hub.
