What is the bolt pattern on a 1993 Toyota Hiace?
Most 1993 Toyota Hiace vans use a 5-lug bolt pattern on a 114.3 mm circle (5x114.3). This is typical for the H100 generation in many markets, but exact specifications can vary by region, so verify for your specific van.
The 1993 Hiace covers several regional variants of the H100 family, with wheel fitments sometimes differing by market (Japan, Europe, Australia, Africa, Southeast Asia). This article explains the typical pattern and how to verify it for your van.
Common bolt pattern for the 1993 Hiace
The typical bolt pattern for a 1993 Toyota Hiace, especially the H100 generation around 1992-1995, is 5 lug holes on a 114.3 mm bolt circle (5x114.3). This matches many Toyota vans and light trucks of the era. Some regional models or earlier export variants may differ, so verify for your exact vehicle before ordering wheels or adapters.
Regional variations you should know
Because Toyota produced the Hiace for many markets, wheel mounting configurations can vary. Always confirm against the vehicle's manual, VIN, or factory parts list to avoid fitment issues.
How to verify the bolt pattern on your 1993 Hiace
The following steps help you confirm the correct bolt pattern for your van before purchasing replacement wheels or adapters.
Before performing the measurement, gather tools and data such as a ruler or calipers, and, if possible, the vehicle's VIN or service manual.
- Inspect the current wheels and hub: count the lug holes; Hiace typically uses five studs.
- Measure the bolt circle diameter (PCD): measure the distance from the center of one lug hole to the center of the farthest lug hole across the hub. For a five-lug Hiace, this is typically 114.3 mm (4.5 inches).
- Check the wheel hub center bore: ensure the replacement wheel's center bore matches or is larger than the hub bore to maintain proper centering. Center bore details vary by market and model year.
- Cross-check with official documentation: refer to the owner's manual or Toyota service catalog or use the VIN to pull exact wheel specs for your vehicle's build date and market.
- Consult a professional: if there is any doubt, ask a Toyota approved dealer or a reputable tire/wheel shop to confirm the bolt pattern for your van.
Once verified, ensure any new wheels or adapters have the correct offset and clearance for your Hiace's suspension and brake setup.
Summary
The 1993 Toyota Hiace most commonly uses a 5x114.3 mm bolt pattern, but market-specific variations can occur. Always verify with official documentation or measurements to ensure proper wheel fitment and safety. Accurate verification helps you avoid incorrect wheel purchases and ensures proper hub centering.
What is the bolt pattern on a 1994 Toyota Hiace?
The 1994 Toyota Hiace typically uses a 6x139. 7 mm bolt pattern with a center bore of 108 mm. The recommended wheel offset ranges from +20 to +35 mm. When selecting 15" wheels, ensure these specs match to avoid clearance problems or uneven tire wear.
What is the bolt pattern on a 1993 Toyota pickup?
The 1993 Toyota Pickup lug pattern is either 5x114.3 (5x4.5 inches) for 2WD models or 6x139.7 (6x5.5 inches) for 4WD models. The correct bolt pattern depends on whether your truck is a 2WD or 4WD, so it is important to verify which one your vehicle has.
- 2WD: 5x114.3 (5x4.5 inches)
- 4WD: 6x139.7 (6x5.5 inches)
What is the bolt pattern on a Toyota Hiace?
Toyota Hiace Bolt Pattern - Generations:
| Generation | Production Years | Bolt pattern |
|---|---|---|
| XH10 [1995 .. 2006] | 1995-2006 | 6x139.7 |
| V (H200) [2004 .. 2026] | 2004-2026 | 6x139.7 |
| XH10 Facelift [2006 .. 2012] | 2006-2012 | 6x139.7 |
| VI (H300) [2019 .. 2026] | 2019-2026 | 6x130 |
What Toyota has a 5x114.3 bolt pattern?
Toyota RAV4: As a popular compact SUV, the RAV4 uses the 5x114. 3 bolt pattern to accommodate a range of driving conditions. Ford Explorer: This family-friendly SUV also benefits from the versatility of the 5x114.
