What is the bolt pattern on a 2017 Honda Civic EX?
The bolt pattern is 5x114.3 mm (five lug holes on a 114.3 mm circle, which is the same as 5 on 4.5 inches).
Bolt pattern specification
For the 2017 Honda Civic EX, the wheel mounting pattern uses five lug holes spaced evenly around a circle with a diameter of 114.3 millimeters. This is the standard fitment for most 10th-generation Civics sold in North America during that year.
Related wheel specifications to know
Understanding the bolt pattern is part of broader wheel-fit considerations. The following details commonly accompany the 5x114.3 mm pattern on this vehicle:
- Bolt pattern: 5x114.3 mm (5 lug holes on a 114.3 mm circle; 4.5 inches).
- Center bore: 64.1 mm. Wheels with a larger center bore may require hub-centric rings for proper centering.
- Lug nut size/thread: M12x1.5.
- Lug nut seat type: typically 60-degree conical (acorn) seat on OEM and many aftermarket wheels.
When shopping for wheels, these specs matter alongside the bolt pattern to ensure proper fitment and safe driving. If you’re purchasing aftermarket wheels, verify both the bolt pattern and the center bore to avoid clearance issues or vibrations.
Installation considerations
Always torque wheel fasteners to the vehicle manufacturer’s specification, typically in the range of about 80–100 ft-lbs (108–135 Nm) for many Civics of this era, and re-torque after the first few hundred miles. If you install wheels with a larger center bore, consider hub-centric rings to maintain precise alignment and reduce vibration.
In practice, matching 5x114.3 mm is the key requirement for the 2017 Civic EX. Center bore compatibility and proper lug-nut seating are the next critical checks to ensure a safe and reliable wheel installation.
Summary: The 2017 Honda Civic EX uses a 5x114.3 mm bolt pattern (5 on 114.3 mm circle). Important accompanying specs include a 64.1 mm center bore, M12x1.5 lug nuts with a 60-degree conical seat, and attention to hub-centric fit when using aftermarket wheels.
