What is the bolt pattern on a 2017 Lexus LX570?
The 2017 Lexus LX570 uses a 6-lug wheel bolt pattern on a 139.7 mm diameter circle (6x139.7 mm, often described as 6x5.5 inches).
Bolt pattern details for the LX570
Understanding the bolt pattern helps you choose compatible wheels and avoid fitment issues. The LX570’s pattern is shared with many Toyota/Lexus trucks and SUVs from the same generation, which can simplify cross-compatibility when shopping for aftermarket wheels or replacement parts.
Before selecting wheels or planning a tire/wheel upgrade, note these core points:
- Bolt pattern: 6x139.7 mm (six studs on a 139.7 mm circle).
- Common descriptor: 6 on 5.5 inches.
- Center bore: typically 78.1 mm (hub-centric rings may be needed if wheels have a larger bore).
Knowing these specifications helps ensure proper seating, alignment, and hub-centered fitment for the LX570.
Verification and compatibility considerations
To confidently replace wheels or install aftermarket rims, verify the pattern and related clearance details beyond the bolt circle. The following steps help confirm fitment and prevent issues.
- Confirm the vehicle’s bolt pattern as 6x139.7 mm by cross-checking owner’s manual, VIN-specific documentation, or a reliable wheel-fitment database.
- Measure or verify the hub bore (center bore) size; ensure wheels either match 78.1 mm or use appropriate hub-centric rings if bore differs.
- Check brake caliper clearance and wheel offset/width to ensure the new wheels won’t rub or interfere with suspension or brake components.
- When in doubt, consult a wheel specialist or dealer to validate compatibility for 2017 LX570 and avoid warranty concerns or safety risks.
Accurate verification helps prevent fitment problems and ensures safe, reliable performance when changing wheels on the LX570.
Summary
The 2017 Lexus LX570 runs a 6x139.7 mm bolt pattern (6 on 5.5 inches) with a typical 78.1 mm center bore. This pattern is common among Toyota/Lexus SUVs and trucks, which can aid in finding compatible wheels, though always confirm center bore and offset for your specific setup. If you’re upgrading wheels, double-check the bore size and clearance to keep the vehicle safe and properly aligned.
