What is the bolt pattern on a 2024 Acura ZDX?
The bolt pattern on the 2024 Acura ZDX is a 5-lug setup on a 114.3 mm bolt circle with a 64.1 mm hub bore. This specification guides wheel compatibility and aligns with Acura’s broader crossovers, making wheel choices more straightforward for most owners.
Understanding what the numbers mean
Bolt pattern, or PCD (pitch circle diameter), tells you how many lug studs a wheel has and the circle those studs form. For the ZDX, the standard configuration is 5 lugs at 114.3 mm apart, with a center bore that fits the vehicle’s hub.
Pattern specifics
For the 2024 ZDX, the core dimensions you’re most likely to encounter when shopping for wheels are:
- Bolt pattern: 5x114.3 mm (five lugs, 114.3 mm circle)
- Hub bore: 64.1 mm
These numbers are the baseline you’ll see on official spec sheets and most forum discussions, and they help determine compatibility with stock and aftermarket wheels. As always, verify against your exact trim and wheel specification sheet, since small variations can occur.
Practical implications for wheel shopping
When selecting wheels or performing a swap, use these guidelines to stay correctly aligned with the ZDX’s design:
- Ensure the wheel design uses a 5x114.3 mm bolt pattern.
- Confirm a hub bore of 64.1 mm or a bore that is sufficiently larger but requires proper centering rings if needed.
- Check offset and width for brake clearance and fender/coil clearance to avoid rubbing or handling issues.
In short, the essential fitment facts for most wheels you’ll consider are the 5x114.3 mm bolt pattern and the 64.1 mm center bore. If you’re pursuing aftermarket options, the dealer or wheel manufacturer should provide precise offset and clearance data tailored to your vehicle’s trim and brake package.
How to verify for your specific vehicle
To confirm the exact spec for your ZDX, use a direct verification approach. This helps ensure you don’t rely on broad generalities when you’re about to purchase wheels or tires.
- Consult the owner’s manual or the vehicle’s build sheet for the factory spec.
- Provide your VIN to a Acura dealer or check the official service portal to pull the exact bolt pattern and hub bore for your VIN.
- If you’re measuring manually, count the lug studs and measure the distance between two opposite lug studs to derive the PCD, and measure the center bore for hub compatibility. This step should be done carefully to avoid damaging components.
Regardless of the method, cross-check the results with the wheel supplier’s specifications before purchase to ensure a proper fit and safe operation on public roads.
Summary
The 2024 Acura ZDX uses a 5-lug bolt pattern on a 114.3 mm PCD with a 64.1 mm hub bore. This pattern is common among Acura/Honda crossovers and supports a wide range of wheels, including many aftermarket options. Always verify the exact numbers for your trim via the owner’s manual, build sheet, or dealership, especially when considering aftermarket wheels or spacers. This diligence helps ensure safe tire mounting, proper brake clearance, and reliable daily driving.
Is the ZDX the same size as the rdx?
RDX Advantages
Measuring 108.3 inches compared to the 121.8 inches offered by the ZDX, those 13 fewer inches in total length make it easy to squeeze in or out of a small space.
What size tires are on the Acura ZDX?
The Acura ZDX tire size depends on the trim level, with the A-Spec typically using 265/50R20 and the Type S model using 275/40R22 for the 2024 and 2025 model years. Older models from 2010-2012 often used a P255/50R19 size, but it's best to check the sticker on your driver's side door jamb for the exact specification of your vehicle.
2024 & 2025 Acura ZDX
- A-Spec: 265/50R20
- Type S: 275/40R22
Older models (approx. 2010-2012)
- Base: P255/50R19
How to confirm your exact tire size
- Check the sticker: The most accurate way to confirm your tire size is to look for a sticker on the driver's side door jamb. It will list the original equipment tire size and recommended pressure.
- Look at the tire sidewall: The size is also printed on the side of your current tires, for example, 265/50R20265 / 50 cap R 20265/50𝑅20.
What is the 4x100 bolt pattern?
A 4x100 bolt pattern means a wheel has four lug holes arranged in a circle with a diameter of 100 millimeters. This pattern is very common on many compact and subcompact cars from various manufacturers, such as Honda, Toyota, and Mazda. The measurement refers to the number of lug holes (4) and the diameter (100mm) of the imaginary circle connecting the center of those holes.
What 4x100 means
- 4: There are four bolt holes (lug holes) on the wheel.
- 100: The distance between the center of the bolt holes forms a circle with a 100-millimeter diameter. This is also referred to as the Pitch Circle Diameter (PCD).
How to measure
- For a 4-lug pattern, you can measure the distance from the center of one hole directly across to the center of the opposite hole.
- The 4x100 pattern is approximately equal to 4x3.94 inches.
Common vehicles with this pattern
- This pattern is found on a wide range of vehicles, particularly compact cars.
- Examples include many models from Honda, Toyota, Mazda, Hyundai, Kia, and Nissan.
- It is also common on some European cars from brands like Opel, Citroën, and Peugeot.
What Acura has a 5x120 bolt pattern?
Acura MDX Bolt Pattern - Generations:
| Generation | Production Years | Bolt pattern |
|---|---|---|
| YD2 [2007 .. 2009] | 2007-2009 | 5x120 |
| YD2 Facelift [2010 .. 2013] | 2010-2013 | 5x120 |
| YD3 [2014 .. 2016] | 2014-2016 | 5x114.3 |
| YD3 Facelift [2017 .. 2021] | 2017-2021 | 5x120 |
