What is the bolt pattern on a Toyota Sienna?
The bolt pattern on the Toyota Sienna is 5-lug holes arranged on a circle 114.3 millimeters in diameter, commonly written as 5x114.3 mm (about 4.5 inches). This means most wheels listed for Sienna fit a 5x114.3 pattern.
What the bolt pattern means for wheels
Bolts on a wheel must align with the hub on the vehicle. A 5x114.3 pattern indicates five holes evenly spaced around a circle with a 114.3 mm diameter. When shopping for wheels, you should confirm the pattern, offset, center bore, and lug nut type to ensure proper fit and safe performance.
Generational consistency
Since the Sienna's introduction in the late 1990s, Toyota has used a 5x114.3 bolt pattern across the model's generations. The current generation continues this standard, simplifying wheel compatibility for owners and aftermarket vendors. Always verify the exact specification for your specific year via the owner's manual or a trusted parts catalog, in case of special trims or regional variations.
How to verify the bolt pattern on your Sienna
To confirm the bolt pattern yourself, you can measure the distance between lug holes across the wheel, or use a bolt pattern gauge. You can also check the vehicle's manual, VIN-based parts catalogs, or ask a dealer for the exact pattern. When in doubt, bring a wheel that you know fits to compare.
Summary
In brief, the Toyota Sienna uses a 5x114.3 mm bolt pattern across model years, meaning five lug holes arranged on a 114.3 mm circle. Verify this pattern for your exact year when choosing wheels or adapters, and consider additional factors like offset and hub bore for a proper fit.
