What is the fuel consumption of the Ford Ranger 3.0 V6?
Approximately 8.0–9.0 L/100 km in mixed driving for typical Ranger 3.0 L V6 diesel configurations; note that the 3.0 V6 is not offered in the U.S. Ranger lineup, which uses different engines.
The Ford Ranger’s 3.0-liter V6 diesel option is a regional variant used in many international markets. Fuel economy depends on the exact version, transmission, drivetrain (2WD vs 4WD), payload, and the test cycle used (WLTP in most regions, EPA in the United States). This article outlines how those figures are published, what drives the differences, and what drivers can expect in real-world use.
Engine availability and testing standards
Markets differ in engine offerings and how efficiency is measured. WLTP values are common outside the U.S., while the United States uses EPA ratings. When comparing numbers, it is important to match the test cycle and the exact vehicle specification.
Market availability
The 3.0 L V6 diesel option is commonly offered in Ranger models sold outside the United States (for example Australia and various European, Asian, and Middle Eastern markets). In the U.S., Ranger models use different engines (such as 2.3L EcoBoost or 2.7L EcoBoost) and do not offer a 3.0 L V6 diesel as of 2024.
Power and configuration notes
These engines are typically paired with a 10-speed automatic transmission, with 2WD or 4WD configurations. Outputs generally range around 150–190 kW (roughly 200–255 hp) and torque around 500–600 Nm, depending on market tuning and emission standards. Official fuel economy numbers come from the regulatory tests for each market (WLTP, EPA, etc.).
Official fuel economy figures
Official numbers vary by region because of different test cycles. WLTP values are standard in many markets; the U.S. uses EPA figures. For accuracy, look up the exact model year, trim, and market to get the precise figure.
Typical WLTP combined figures (approximate):
- 2WD, automatic: about 8.0–8.8 L/100 km
- 4WD, automatic: about 8.5–9.5 L/100 km
In short, expect around 8–9 L/100 km for common Ranger 3.0 L V6 diesel configurations on WLTP, with variations based on drivetrain, tyres, payload, and test cycle.
Real-world factors that affect fuel economy
Real-world fuel economy can deviate significantly from official figures due to loads, terrain, and driving style. The following factors commonly influence the Ranger’s 3.0 L V6 consumption:
- Payload and towing weight increase fuel use, especially on inclines.
- City driving with frequent stops raises consumption versus steady highway cruising.
- 4WD mode and off-road conditions consume more fuel than 2WD.
- Tyre pressure and condition affect rolling resistance and efficiency.
- A/C usage and climate control can impact fuel burn, particularly in extreme weather.
- Maintenance, oil grade, and regular servicing influence efficiency.
Being mindful of these factors helps explain why real-world numbers may differ from official ratings.
Summary
The Ford Ranger 3.0 L V6 diesel commonly reports combined fuel consumption in the 8.0–9.5 L/100 km range on WLTP cycles, with variation by market, drivetrain, and equipment. In the U.S., the 3.0 L V6 diesel is not offered; potential buyers should reference the available EcoBoost engines and their EPA ratings. For precise figures, consult official regulator data or the manufacturer for the specific model year and trim you are considering.
