What is the ground clearance of the nx250?
Typically around 11.5–12 inches (about 290–305 mm) of ground clearance, though the exact figure varies by year and configuration.
The Honda NX250 is a classic dual-sport motorcycle produced across various markets from the late 1980s into the early 2000s. Ground clearance is a key spec for off-road performance and can vary with model year, market, and installed accessories such as skid plates or suspension tweaks. For the precise number on your bike, consult the official owner's manual or Honda service data for your exact year and market.
What affects the NX250's ground clearance?
The listed clearance provides a baseline, but real-world measurements can differ due to setup, load, and accessories. Variations can occur between model years and international variants.
Key factors that influence clearance
Suspension travel and sag: different setups can slightly change the effective clearance when the bike is loaded or unloaded.
Skid plates and guards: an attached skid plate or other underbody protection can reduce measured clearance by a small amount, depending on thickness.
Tire size and wheel configuration: larger tires or different wheel sizes can alter overall height and clearance at the lowest point.
Load and riding position: rider weight, passengers, and luggage can reduce clearance when the bike carries a load.
How to verify the clearance on your NX250
To confirm the exact clearance for your bike, refer to the official spec in the owner's manual for your year. If you want a hands-on check, measure from level ground to the lowest point of the bike’s undercarriage (typically the bottom of the engine case or skid plate) with the suspension unloaded and the bike upright.
Keep in mind that measurements can vary by year and market, so the official specification for your exact model should be your primary reference.
Summary
Ground clearance for the Honda NX250 generally sits in the 11.5–12 inch range (approximately 290–305 mm). For the most accurate figure, consult your specific year’s owner’s manual or Honda service documentation, especially if aftermarket parts or different markets are involved. This ensures you know the bike’s true clearance in its current configuration.
