What is the lug pattern on a 5 lug Toyota Tacoma?
The lug pattern, or bolt pattern, on a Toyota Tacoma with five lugs is 5 x 114.3 mm (5x4.5 inches).
Applied to most Tacomas—from the first generation through today—this pattern means five wheel studs arranged on a circle with a diameter of 114.3 mm. It contrasts with the larger, six-lug patterns used by some other trucks and SUVs, and it underpins wheel compatibility across a wide range of aftermarket options.
Bolt pattern basics
Key facts to know when evaluating wheels for a Tacoma include:
- Pattern: 5-lug bolt pattern
- Bolt circle diameter: 114.3 mm (4.5 inches)
- Typically used on Toyota Tacomas from the 1995 model year onward (all generations)
- Also shared with many Toyota passenger cars and some other Toyota trucks
In practice, the 5x114.3 pattern is the standard fitment you will encounter when shopping wheels or adapters for a Tacoma. Always verify center bore size and offset in addition to the bolt pattern to ensure proper fitment.
Generation-wide consistency and practical checks
Across generations, the Tacoma's lug pattern has remained consistent, but there are practical considerations when upgrading wheels:
- Center bore compatibility: ensure the wheel bore fits the hub, or use hub-centric rings if needed
- Offset and width: confirm the wheel offset and width will clear brakes, calipers, and fenders
- Lug nut type and seat: verify the correct lug nut type and seat (cone/collector) for the wheel
- Caliper clearance: check that aftermarket wheels have sufficient clearance for the brake calipers
With these checks, most aftermarket wheels marked 5x114.3 will fit a Tacoma, provided offset and center bore considerations are met. When in doubt, consult the wheel manufacturer or a qualified installer before mounting.
Where to verify official specifications
If you want to confirm specifics for your exact year and trim, consult reliable sources and official documentation:
- Toyota official parts catalogs and service manuals
- Your vehicle’s owner manual or factory build sheet
- Wheel manufacturers’ fitment guides and catalogs
- Trusted automotive retailers and professional installers with Tacoma experience
In short, rely on official sources and cross-check with your supplier to ensure precise compatibility for your vehicle.
Summary
The 5-lug Toyota Tacoma uses a 5x114.3 mm bolt pattern (5x4.5 inches) across its generations, making a broad range of wheels and adapters compatible in principle. Always verify center bore size, wheel offset, and caliper clearance in addition to the bolt pattern before purchasing or mounting wheels. When in doubt, consult official specifications and a qualified installer to confirm fitment for your specific model year and configuration.
What is the bolt pattern on a 2000 Toyota Tacoma?
The 2000 Toyota Tacoma has a 5x114.3mm (or 5x4.5 inch) lug pattern for its 2WD models and a 6x139.7mm (or 6x5.5 inch) lug pattern for its 4WD models. You need to determine which version you have to ensure a proper wheel fit.
- 2WD models: Use a 5-lug pattern with a 114.3mm bolt circle diameter, also commonly referred to as 5x4.5 inches.
- 4WD models: Use a 6-lug pattern with a 139.7mm bolt circle diameter, or 6x5.5 inches.
What is the bolt pattern on a 5 lug Toyota Tacoma?
5×114.3mm
First and second generation Tacomas (1995-2011) use a 5×114.3mm bolt pattern, while third and fourth generation models (2016-present) use a 6×139.7mm pattern.
What is the Toyota 5 lug bolt pattern?
For instance, many Toyota sedans and SUVs use a 5 x 114.3 mm bolt pattern, a standard size that opens up a wide range of interchangeable options. A bolt pattern, or lug pattern, refers to the configuration of the lug holes on a wheel.
Is 5x4 5 the same as 5x114 bolt pattern?
The 5x114. 3 lug pattern, often referred to as 5x4. 5, is used mostly for older generation Jeep Wranglers (up to 2006), but is also common among other SUVs and cars, though offsets may need to run higher. Wheels available for this bolt pattern are numerous, so you will have a lot to choose from.
