What is the recall on the 2018 Ford Focus engine?

The short answer is that there isn’t a single, universal recall for the 2018 Ford Focus engine. Instead, multiple engine-related recall campaigns have affected Focus models in various regions, depending on the vehicle’s VIN (Vehicle Identification Number) and market. To know definitively whether a given car is affected, you must check the VIN against official recall databases.

In this article, we outline how recalls are determined for the 2018 Ford Focus, where to check for current and past campaigns, and what steps to take if your vehicle is named in a recall. The information is kept up to date with guidance from safety regulators and Ford’s recall resources.

What counts as a recall for the 2018 Ford Focus engine

Recalls are official, safety-related campaigns mandated by regulators and manufacturers. For the Focus, engine-related recalls can cover a range of components, including fuel delivery, engine wiring and management, ignition systems, or emissions-related parts. Each recall is linked to specific VINs and may involve one or multiple campaigns over the life of the vehicle.

Below are common characteristics of engine-related recalls that have appeared in Focus campaigns in various markets. These examples illustrate the types of defects that might trigger a recall, though not every vehicle will be affected.

• The campaign may involve a fuel system or fuel delivery component that could affect performance or pose a safety risk.


• Engine wiring or harness issues that could cause misfires, stalling, or electrical faults.


• Engine management or sensor problems that could alter engine timing or fuel trim.


• Emissions-related components that require inspection or replacement to ensure proper operation.

Remember: the exact campaigns and their applicability depend on your VIN and country. If a recall exists for your car, the notice will specify the affected VINs, the remedy, and how long the repair should take.

How to check recall status for your 2018 Ford Focus

To determine whether your specific vehicle is affected by any open recalls, you’ll need your VIN and access to official sources. The following steps guide you through the verification process.

1. Locate your VIN. It is a 17-character identifier found on the dashboard near the windshield, on the driver’s door or door jamb, and on your vehicle registration or insurance card.


2. Visit the National Highway Traffic Safety Administration (NHTSA) recall database or the official Ford recall portal. Enter your VIN to pull up any active recalls or campaigns that apply to your car.


3. If a recall is listed, read the notice carefully for the remedy, parts, and estimated service time. The notice will indicate whether the work is required immediately or can be scheduled at a convenient time.


4. Contact your nearest Ford dealer to schedule the recall service. In the United States, recall repairs are performed at no cost to the vehicle owner.


5. Keep records of all recall communications and service receipts. If you have already had a related issue repaired under a repair campaign, provide those details to the dealer to avoid redundant work.

If you’re unsure about the results from an online check, contact Ford customer service or your local dealer for confirmation. VIN-based recall determinations are the official source of truth.

What to do if a recall affects your vehicle

When a recall affects your 2018 Ford Focus engine, the recommended action is to have the recall completed at a Ford dealership or an authorized service center. Because recalls are safety-related, Ford and regulators require the remedy to be performed at no cost to the owner, and the repair is typically scheduled at your convenience or prioritized if the defect presents an immediate safety risk.

1. Do not drive the vehicle beyond what the recall notice advises, especially if you’re warned about immediate safety concerns or performance issues.


2. Arrange a service appointment with a Ford dealer as soon as you confirm an active recall for your VIN.


3. Provide the dealer with the recall notice or the VIN lookup result so they can access the exact campaign and remedy for your car.


4. Ask about the estimated time for the repair and whether a loaner vehicle is available if you need transportation while your Focus is in the shop.


5. After the repair, request documentation showing that the recall work was completed and keep it with your vehicle records.

For ongoing updates, check your country’s official recall portals and sign up for recall notifications from Ford or the regulator in your area.

Where to find official information

Rely on official sources to confirm recalls for your vehicle. The primary options are:

- NHTSA recall database: https://www.nhtsa.gov/recalls

- Ford owner recall information: https://owner.ford.com/support/recalls

If you prefer, you can also contact Ford Customer Service or your local Ford dealership for direct assistance with VIN-specific recall information.

Summary

In short, there is not a single recall that covers all 2018 Ford Focus engines. Instead, multiple VIN-specific engine-related recalls may apply, varying by country. To know whether your vehicle is affected, look up your VIN on official recall databases, and contact a Ford dealer to arrange the proper, no-cost remedy if an open recall is found. Staying informed through NHTSA and Ford’s recall channels is the best way to ensure your Focus is safe and compliant.

What is the Ford engine recall 2018?

Ford Motor Company (Ford) is recalling certain 2016-2017 Ford Expedition, Lincoln Navigator, and 2016-2018 F-150 vehicles equipped with 3.5L Ecoboost engines. The brake master cylinder may allow brake fluid to leak from the front wheel circuit into the brake booster.

Are there any recalls on a 2018 Ford Focus?

The 2018 Ford Focus has two main recalls: one for certain models with a 1.0L EcoBoost engine due to a faulty oil pump drive belt and tensioner that can cause a stall and loss of power braking, and another for 2.0L GDI or GTDI engines where a malfunctioning canister purge valve can lead to an excessive vacuum in the fuel system, also potentially causing a stall. There is also a recall for certain manual transmission models with a 1.0L engine for a clutch fracture issue.
 
This video explains one of the recalls for the 2018 Ford Focus due to engine issues: 36sIsland NewsYouTube · Jan 10, 2024
Oil pump drive belt and tensioner (for 1.0L EcoBoost engines) 

• Symptom: Oil pump drive belt or tensioner can fail, leading to a loss of engine oil pressure. 
• Risk: This can cause the engine to stall and result in a loss of power braking assist, increasing the risk of a crash. 
• Affected models: Certain 2016–2018 Ford Focus vehicles with the 1.0L engine. 
• Repair: Ford dealerships will replace the oil pump drive belt tensioner assembly with a redesigned part free of charge. 

Canister Purge Valve (CPV) (for 2.0L engines) 

• Symptom: A malfunctioning canister purge valve can get stuck open, creating excessive vacuum in the fuel vapor management system. 
• Risk: This can cause the vehicle to hesitate, stall, or be unable to restart. 
• Affected models: Certain 2012–2018 Ford Focus vehicles with a 2.0L GDI or 2.0L GTDI engine. 
• Repair: The fix involves reprogramming the Powertrain Control Module (PCM) and may also include replacing the purge valve and other components. 

Clutch (for certain manual transmission models) 

• Symptom: The clutch may fracture, which can damage the transmission and potentially cause a leak of transmission fluid.
• Affected models: Approximately 2,800 model-year 2016–2018 Ford Focus vehicles with a 1.0-liter Fox GTI engine and a six-speed manual transmission.
• Risk: Transmission damage and fluid leaks. 

How to check for recalls

• To see if your specific vehicle is affected, check the recall status using your vehicle's VIN on the National Highway Traffic Safety Administration (NHTSA) website or Ford's recall website. 
• Contact your local Ford dealership to schedule a free repair if your vehicle is affected. 

What is the engine problem on the 2018 Ford Focus?

2018 Ford Focus Recall Ford has recalled certain model years of the EcoSport small crossover and Focus compact car for an oil pump that can fail and cause the engine to stall, the NHTSA disclosed Monday. An arm holding the oil pump belt in place can break or separate, or the belt itself can degrade.

What is the lawsuit on the 2018 Ford Focus?

The lawsuit alleges that certain Ford Focus and Fiesta vehicles are equipped with a defective PowerShift Dual-Clutch Automatic (DPS6) Transmission (“PowerShift Transmission”) that may slip, buck, kick, or jerk, and result in sudden or delayed vehicle acceleration.