How much does it cost to replace a clutch in a Honda Civic?
For a Honda Civic with a manual transmission, you can typically expect a total cost around $1,000 to $2,000 in the United States, depending on whether the flywheel is resurfaced or replaced, the model year, and local labor rates. Higher-end situations or newer dual-mass flywheels can push the cost higher.
What drives the price
Several factors influence the final bill. The price quoted by a shop depends on parts costs, labor time, flywheel condition, and any additional components that must be replaced. The following breakdown highlights the main cost components you’ll likely encounter.
- Clutch kit: typically includes the clutch disc, pressure plate, and throw-out bearing
- Flywheel handling: resurfacing if possible, or replacement with a dual-mass flywheel (DMF) when required
- Hydraulic components: slave cylinder, master cylinder, seals, and related hardware
- Labor: hours required to remove the transmission and install the new clutch
- Support parts and services: pilot bearing, alignment tool, transmission fluids, disposal fees, and shop supplies
In practice, these elements combine to determine the total, with Civics in higher-cost markets or those needing DMF replacements typically on the higher end of the spectrum.
Typical cost ranges in the United States
The ranges below reflect common shop pricing for a manual Honda Civic in the United States. They assume a standard clutch kit replacement and typical labor rates; actual prices vary by state, city, and shop.
- Clutch kit (disc, pressure plate, throw-out bearing): roughly $120–$350
- Flywheel treatment: resurfacing (if feasible) $60–$150; full flywheel replacement (often DMF) $350–$900
- Labor: usually 4–8 hours at about $80–$150 per hour: $320–$1,200
- Additional parts (slave/master cylinder, seals, pilot bearing, alignment): $50–$200
- Estimated total: commonly $1,000–$2,000; in some cases with DMF or high labor rates, $2,000–$2,500 or more
Bottom line: plan for roughly $1,000 to $2,000 for most Civics, with opportunities to save if the flywheel is in good condition or you shop for lower labor rates. In metropolitan areas or when DMF is involved, costs can climb.
Manual vs automatic Civics
The term clutch replacement applies to Civics with manual transmissions. Automatics do not use a user-serviceable clutch in the same way, and repairs involve different components such as the torque converter and transmission internals, which can be costlier and are not described as a simple “clutch replacement.” If you’re experiencing shifting or slipping in an automatic Civic, obtain a diagnostic to determine whether the issue lies with the transmission or related hydraulic systems.
Flywheel type and model-year considerations
Costs can vary depending on whether your Civic uses a solid flywheel or a dual-mass flywheel (DMF). DMFs tend to add to both parts and labor costs due to their complexity and the precision required during replacement. Some model years are more likely to require a DMF when a clutch is replaced, while others use a simpler, solid flywheel. Always confirm with the shop what type of flywheel your car has and whether replacement is necessary in your service plan.
Summary: Clutch replacement costs for a Honda Civic depend on model year, flywheel type, location, and labor rates. In most of the United States, budget around $1,000 to $2,000, with higher costs possible for DMFs or in high-cost regions. Get multiple quotes and request a line-item breakdown to avoid surprises.
Summary
In short, replace-a-clutch costs for a Honda Civic typically range from roughly $1,000 to $2,000 in the United States. Factors that push prices higher include dual-mass flywheels, high labor rates, and metropolitan-area pricing. For the most accurate estimate, obtain written quotes from several shops, confirm whether the flywheel needs replacement, and decide whether any related components (hydraulics, pilot bearing, seals) should be replaced at the same time.
