What is the recall on the Acura TLX V6 engine?

The TLX with a V6 engine does not have a single, universal recall that applies to all models. Instead, recalls have been issued at different times for specific model years and VIN ranges. To determine if your car is affected, you must check official recall databases using your vehicle identification number (VIN).

Understanding the recall landscape for the TLX V6

Recall notices are issued by regulators and manufacturers and are model-year- and VIN-specific. For the TLX, engine-related recalls have historically targeted particular production runs rather than every V6-equipped vehicle. The exact scope can vary by region, year, and the individual vehicle’s equipment.

Key resources you can use to verify recalls are listed below.

• NHTSA recall database (VIN search)


• Acura owner portal (registered users can check open recalls)


• Your local Acura dealer (they can look up recalls by VIN and arrange service)


• Regulatory notices and press releases published by automotive safety authorities

Using these sources will help you confirm whether a TLX V6 you own or are considering is affected by an open recall and what remedy is available.

How to check your TLX V6 recall status

To verify recall status and ensure any required service is performed at no cost, follow these steps:

• Gather your vehicle identification number (VIN). The VIN is a 17-character code located on the lower driver's side windshield, the driver’s doorjamb, or in your registration documents.


• Visit the NHTSA recall page and enter the VIN, or use the Acura owner portal if you have an Acura account.


• Review the list of recalls associated with your VIN. Pay attention to model year, production date, and the specific component involved.


• Contact your local Acura dealer to schedule service for any open recalls. Confirm the service is performed at no cost to you.


• Keep records of the recall notice and any service performed for future reference or resale purposes.

In practice, recall remedies are performed free of charge by authorized dealers, and the service time can vary based on the repair and parts availability.

What to do if you suspect a problem is related to a recall

If you notice symptoms that could be related to a recall—such as engine stalling, warning lights, unusual noises, or fuel odors—do not delay service. Contact Acura support or your dealer to determine whether the issue is the subject of a recall or a different service bulletin, and schedule an inspection promptly.

Understanding the recall process

Recall processes are designed to be customer-friendly: once a recall is issued for a VIN, the owner is notified via mail or email. Dealers perform the repair, parts are supplied at no cost to the owner, and the work is documented in the vehicle's service history.

What to expect during recall service

When a recall affects your TLX V6, the expected steps typically include an inspection, a manufacturer-approved repair, and verification that the remedy has been completed. The exact duration depends on the nature of the fix and parts availability, but most visits are scheduled to minimize disruption to the owner's routine.

Summary

There is no single recall to quote for the Acura TLX V6 engine. Recalls are VIN- and model-year-specific, so the only reliable way to know your status is to check official sources with your VIN. If a recall is found, the repair is provided free of charge by the dealer. Regularly review notices from NHTSA, Acura, and your local dealer to stay informed and act promptly if a recall exists for your vehicle.

What is the Acura engine lawsuit?

The lawsuit alleges, among other things, that Honda: failed to disclose that these vehicles contain certain defects that cause unintended and unpredictable deceleration, engine stalls, hesitation upon depressing the gas pedal, abrupt shutdowns and shifts into neutral while driving, and enter "Limp Mode"; and.

What Acura has a recall on V6 engines?

TLX
Acura has issued a recall for certain model years of the TLX and MDX due to a rod bearing defect that may result in engine failure. Affected vehicles include 2015-2020 Acura TLX V6 models and 2016-2020 Acura MDX models.

What is the recall on the Acura TLX engine?

Acura has recalled certain 2015-2020 V6 TLX models for a defect in the connecting rod bearings that can cause premature wear and engine failure. Acura has also recalled certain 2022-2025 MDX Type-S and 2021-2025 TLX Type-S models for a software error that can cause an engine stall or loss of power. Owners can check their vehicle's recall status on the Acura Recall Lookup tool by entering the VIN. 
You can watch this video to learn more about the Acura connecting rod bearing recall: 55sHonda JonYouTube · Nov 10, 2023
Connecting rod bearing recall (2015-2020 V6 TLX)

• Problem: A manufacturing defect in the crankshaft can cause the connecting rod bearing to wear out prematurely, leading to the engine seizing and potential failure. 
• Symptoms: Abnormal engine noise, engine stalling, or loss of power with a "check engine" light. 
• Solution: Acura will inspect the engine and perform repairs, including a free engine replacement if necessary. 

Software recall (2022-2025 MDX Type-S and 2021-2025 TLX Type-S) 

• Problem: A software error in the fuel injection electronic control unit (FI-ECU) may cause the engine to stall or lose power. 
• Solution: The software will be reprogrammed at an authorized Acura dealership. 

What to do

• Check your VIN: Visit the Acura Recall Lookup tool and enter your Vehicle Identification Number (VIN) to see if your specific vehicle is affected by either recall. 
• Schedule a service appointment: If your vehicle is affected, schedule an appointment at an authorized Acura dealership for the free inspection and repair. 

You can watch this video to learn about the software recall for MDX Type-S and TLX Type-S models: 59sHonda JonYouTube · Jan 30, 2025

Which Acura TLX years have engine problems?

Connecting Rod Bearing Recall on Acura TLX and Acura MDX

• Certain 2015-2020 Acura TLX V6 models and 2016-2020 Acura MDX models have been recalled by Acura due to a critical problem with the rod bearing.
• Such engine failure while driving could significantly increase the risk of an accident.