Loading

What is the tire pressure for a Lexus NX200t?

The tire pressure for the Lexus NX200t is typically about 33 psi in both the front and rear tires when cold, but the exact specification can vary by year, trim, wheel size and load. Always confirm with the door placard or the owner's manual for your specific vehicle.


The Lexus NX200t, a compact SUV with a turbocharged engine, relies on precise tire inflation to ensure safety, handling, fuel efficiency, and tire wear. This guide explains where to find the official numbers and how variations in setup can affect the recommended pressure.


Where to find the official specification


The correct tire pressure is listed on the driver’s door jamb placard and in the owner's manual. These sources show separate cold-pressure targets for the front and rear tires and may include a higher value for loaded conditions.


The following checklist helps you locate and confirm the exact cold tire pressures for your NX200t, which can vary by year, wheel size and load.



  • Check the driver’s door jamb placard for the stated cold tire pressures (front and rear).

  • Confirm the tire size shown on the placard matches your current tires (some NX200t trims use different sizes across model years).

  • If you regularly carry heavy loads or passengers, verify whether the placard provides a different recommended pressure for those conditions.

  • Consult the owner's manual or contact a Lexus dealer if the placard is missing or illegible.


By following these steps, you can confirm the exact cold tire pressure for your NX200t and maintain proper inflation for safety and efficiency.


Common ranges and practical guidance


While your exact number should come from the placard, these general guidelines help you understand typical targets and how to apply them in daily use.



  • Most NX200t models with standard tires list about 33 psi for both the front and rear tires when cold.

  • Some configurations, especially with larger or sport-oriented wheels or when carrying heavier loads, may require 34-36 psi to maintain similar handling and tire wear characteristics.

  • Do not inflate to the tire's maximum sidewall pressure; this number is the maximum load the tire can carry, not the recommended operating pressure.

  • Always measure tire pressure when the tires are cold, ideally after the vehicle has been stationary for several hours or before the car has been driven for the day.


These guidelines are intended to help you set and verify inflation aligned with the vehicle's design, but the door placard remains the definitive source for your NX200t's exact pressures.


Notes on variations and maintenance


As a practical matter, tire pressure should be checked at least monthly and before long trips. Seasonal temperature changes can affect pressure by about 1 psi for every 10 degrees Fahrenheit change, so adjust accordingly.


What to do if you change tire size or wheels


If you swap to aftermarket wheels or a different tire size, you should recalculate the recommended pressures using the new tire's load index and the vehicle's recommended inflation for that size, often listed in the owner's manual or by the tire manufacturer, and you may need to reconfigure the pressures accordingly.


Summary: The Lexus NX200t's tire pressures are specified by the factory for cold tires, typically around 33 psi front and rear for standard setups. Always default to the placard on the driver’s door jamb and the owner's manual; temperatures, loads, and wheel sizes can alter the exact numbers. Regular checks help maintain safety, fuel efficiency, and tire longevity.

What is the tire pressure for Lexus 200t?


The recommended cold tire pressure for a Lexus IS200t is typically 36 psi (pounds per square inch) for both front and rear tires, but this can vary slightly based on the specific wheel and tire size. For the most accurate reading, check the sticker on the driver's side doorjamb, or consult your owner's manual. 
You can watch this video to learn how to check your tire pressure on a Lexus: 59sLexus of North HillsYouTube · May 18, 2020

  • General recommendation: Many Lexus models, including the IS200t, are designed to run at 36 psi. 
  • How to check your specific pressure: Look for a sticker inside the driver's side doorjamb, which has the precise recommended pressure for your vehicle. 
  • Why check when cold: Always check tire pressure when the tires are "cold" (haven't been driven for at least three hours) for the most accurate reading, as temperature affects pressure. 
  • What to do with a low pressure warning: If your tire pressure warning light comes on, it's important to check and inflate your tires to the correct pressure. You may need to reset the warning system afterward. 



What is the tire pressure for a Lexus NX 200t?


The recommended tire pressure for a Lexus NX 200t is typically 32 psi for models with 18-inch wheels and 35 psi for models with 17-inch wheels. However, the most accurate information will be on the sticker inside the driver's door frame or in your owner's manual, as it can vary based on your specific vehicle and original tires. 

  • Models with 18-inch wheels: 32 psi 
  • Models with 17-inch wheels: 35 psi 
  • Where to find the definitive answer: Check the sticker on the driver's side door jamb or your owner's manual for the precise recommendation for your vehicle. 
  • When to check: Always check the pressure when the tires are cold for the most accurate reading. 



Can I put 87 in my Lexus NX?


If you're looking for a Lexus that runs on 87-octane fuel, there are a few options in the lineup: Lexus ES (ES 250, ES 350, ES 300h) Lexus UX (UX 250h) Lexus NX (NX 250, NX 350, NX 350h)



Should I use 32 or 35 tire pressure?


For most cars, the recommended tire pressure is between 32 and 35 psi, and you should use the pressure listed on the driver's side door jamb or in the owner's manual. The correct pressure can vary by vehicle, and the pressure on the tire's sidewall is a maximum, not the recommended value. Using the correct pressure ensures proper handling, fuel efficiency, and tire life, while using the wrong pressure can cause poor handling, reduced traction, and premature wear.
 
How to find the right pressure

  • Check the sticker on the driver's side door jamb. This is the most reliable source for your specific vehicle. 
  • Consult your owner's manual for the manufacturer's recommendation. 
  • Note that the pressure should be checked when the tires are cold (before driving). 
  • Don't use the pressure listed on the tire's sidewall, as this is the maximum pressure the tire can hold, not the recommended pressure for your car. 

Why the correct pressure is important
  • Too low: Can lead to poor fuel economy, premature tire wear, and a higher risk of tire failure. 
  • Too high: Can cause reduced traction, an uncomfortable ride, and rapid, uneven tire wear. 
  • Correct pressure: Optimizes handling, safety, and fuel efficiency, and helps your tires last longer. 


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.