What is the torque specs for Honda lug nuts?
The recommended torque specification for Honda lug nuts is 80-94 ft-lbs (108-127 Nm). This torque range ensures the lug nuts are tightened to the proper tension, preventing the wheels from becoming loose and potentially causing a dangerous situation while driving.
Understanding Lug Nut Torque
Lug nuts are the fasteners that secure a vehicle's wheels to the hubs. Proper torque is essential to maintain wheel integrity and prevent the wheels from becoming detached. Undertightening the lug nuts can lead to the wheels becoming loose, while overtightening can damage the studs or wheel components.
The torque specification provided by the vehicle manufacturer, in this case Honda, is the optimal amount of force required to tighten the lug nuts. This value is determined through extensive testing to ensure the wheels are securely mounted without causing any damage.
Checking and Maintaining Lug Nut Torque
- Use a torque wrench to tighten the lug nuts to the recommended specification of 80-94 ft-lbs (108-127 Nm).
- Recheck the torque after driving the first 50-100 miles (80-160 km) to ensure the lug nuts have not loosened.
- Periodically inspect the lug nuts and retighten them to the proper torque, typically during routine maintenance or tire rotations.
- If a wheel has been removed and reinstalled, always recheck the torque to ensure the lug nuts are properly tightened.
Maintaining the correct lug nut torque is crucial for safe driving and preventing potential wheel separation incidents. Always refer to the Honda-specified torque range when servicing your vehicle's wheels.
Where can I find torque specs for my car?
Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can't find that information, or if you don't have a guide, you can find the specs in the service manual.
What is the torque on the wheel nut on a 2013 Honda CRV?
80 lbf·ft
The wheel nut torque is 108 N·m (11.0 kgf·m, 80 lbf·ft).
What is the torque spec for Honda lug nuts?
80 ft-lbs
The recommended lug nut torque for most Honda vehicles is 80 ft-lbs (108 Nm). However, it's crucial to consult your owner's manual to confirm the exact specification for your model and year, as there might be slight variations.
What torque should bolts be?
US Recommended Bolt Torque
| Size | Recommended Torque | |
|---|---|---|
| Grade 2 | Grade 8 | |
| 1/2" | 37 | 80 |
| 9/16" | 53 | 115 |
| 5/8" | 73 | 159 |
What torque should lug nuts be tightened to?
Most vehicles have lug nuts that require around 100 pound-feet of torque, but some vehicles require more or less. It's best to check your vehicle's manual to find out the exact specifications you need. You should properly torque your lug nuts when installing new wheels and after driving 50 to 100 miles on new wheels.
What is the torque on a 2013 Honda Civic lug nut?
The 2013-2025 Honda Civic Type-R lug nut torque spec is 127 Nm (94 ft-lb) and the 1997-2012 Civic Type-R lug nut torque spec is 108 Nm (80 ft-lb). In most cases, your tire installer will have a recommended torque number. Set the torque wrench to the manufacturer's recommended value.
What is the torque on the lug nuts on a 2017 Honda Accord?
The wheel nut torque is 108 N·m (11.0 kgf·m, 80 lbf·ft).
Is 450 ft/lbs enough torque for lug nuts?
Matching Impact Wrench Size to Lug Nut Torque:
| Impact Wrench Drive Size | Typical Torque Output Range (ft-lbs) | Suitable Lug Nut Torque Range (ft-lbs) |
|---|---|---|
| 3/8-inch | 50 - 150 | Up to 75 |
| 1/2-inch | 250 - 400 | 75 - 250 |
| 3/4-inch | 450 - 700 | 200 - 400 |
| 1-inch | 800+ | 400+ |
What is the torque on 2016 Honda wheels?
The proper torque setting is 80 lb. ft.
What is the torque on Honda Fit lug nuts?
Tighten the lug nuts securely. The recommended torque is: 110 N·m (11 kg-m,80 Ib-ft) If a torque wrench was not used, ask an authorized Honda dealer to verify the torque as soon as possible.
