What is the Toyota bolt pattern?
Toyota does not rely on a single bolt pattern. The most common pattern for modern Toyota passenger cars is 5x114.3 mm, but several patterns are used across different models and generations. Always verify the exact pattern for your specific vehicle before buying wheels or adapters.
What is a bolt pattern and why it matters
A bolt pattern (also called a bolt circle diameter or BCD) is the arrangement of lug holes on a wheel hub. It determines whether a wheel can be mounted on a vehicle’s hub. Using the wrong pattern can result in poor fit, unsafe mounting, or improper seating. In addition to the number of lug holes, the diameter of the bolt circle and the center bore are critical compatibility factors.
Common Toyota bolt patterns
Below is a quick reference to patterns you are likely to encounter with Toyota vehicles. Remember that exact patterns depend on model and year, so always double-check your specific car’s specifications.
- 5x114.3 mm (5 on 114.3 mm circle) — The most widespread pattern for many modern Toyota passenger cars, including several generations of Camry, Corolla, RAV4, Highlander, and Sienna. Is a good starting point if you’re shopping for aftermarket wheels.
- 6x139.7 mm (6 on 139.7 mm circle) — Used on Toyota trucks and larger SUVs such as Tacoma, 4Runner, Land Cruiser, Sequoia, and Tundra. This pattern is common for off-road and heavy-duty setups.
- 5x100 mm — Appears on some older or regional Toyota models and certain compact cars. If your vehicle is from earlier decades, this pattern may be present.
- 4x100 mm — Found on some smaller Toyota cars and certain regional markets. This pattern is less common on newer models but can appear on specific regional configurations or older vehicles.
As patterns can vary by year and trim, use this as a guide and verify with the original equipment manufacturer (OEM) data for your exact vehicle.
Pattern details at a glance
For quick decisions, focus on the following three data points: number of lug holes, bolt-circle diameter (BCD/PCD), and center bore. Even if the lug count matches, mismatches in either the BCD or center bore can prevent proper wheel fitment. When in doubt, consult the dealer or a trusted wheel professional.
How to verify your bolt pattern
To determine the precise bolt pattern for your Toyota, follow these steps.
- Check your vehicle’s manual or the door jamb sticker for wheel and tire specifications, which often list lug pattern information.
- Inspect an existing wheel hub: count the number of lug holes (4, 5, or 6) to establish the lug count.
- Measure the bolt circle diameter (BCD/PCD): measure from the center of one lug hole to the center of the lug hole directly across from it (for odd-numbered patterns, use the distance between opposite holes as a guide). This gives you the diameter in millimeters or inches (e.g., 114.3 mm or 4.5 inches).
- Check the center bore diameter: the hole at the hub center; wheels with a larger bore may require spacers or hub-centric rings for proper fitment.
- Confirm thread pitch and lug nut thread size if you’re purchasing new lug nuts or a wheel set; mismatched thread pitch can damage wheels or studs.
If you cannot locate reliable information in the manual or online, contact a Toyota dealer parts department or use a reputable wheel-fitment database to confirm your exact pattern before purchasing aftermarket wheels.
Summary
In short, Toyota uses multiple bolt patterns depending on model and year. The most common today is 5x114.3 mm for passenger cars, while 6x139.7 mm is typical for trucks and larger SUVs. Some older or regional models may use 5x100 mm or 4x100 mm. Always verify the precise pattern for your vehicle by checking the manual, inspecting the hub, or consulting a qualified source before buying wheels or adapters.
What Toyota has a 5x114.3 bolt pattern?
Toyota RAV4: As a popular compact SUV, the RAV4 uses the 5x114. 3 bolt pattern to accommodate a range of driving conditions. Ford Explorer: This family-friendly SUV also benefits from the versatility of the 5x114.
What is the Toyota 5 lug bolt pattern?
For instance, many Toyota sedans and SUVs use a 5 x 114.3 mm bolt pattern, a standard size that opens up a wide range of interchangeable options. A bolt pattern, or lug pattern, refers to the configuration of the lug holes on a wheel.
What cars have a 4x108 bolt pattern?
Cars with a 4x108 bolt pattern include many models from Ford (such as the Fiesta, Focus, and Escort), Volvo, Saab, Alfa Romeo, Mazda, and Peugeot. Some older models like the Ford Mustang II and various models of the Audi 4000 and Porsche 924 also use this pattern.
Ford
Fiesta, Focus, Escort, Contour, Fusion, Ka, Mondeo, Mustang (classic models), Thunderbird (classic models), Puma, Ecosport, and Cortina.
Volvo
850.
Saab
900 and 9000.
Alfa Romeo
Spider (certain years).
Audi
- 4000 Quattro
- Quattro
- 80, 90, Coupe, and Cabriolet (certain years)
- 5000 (non-turbo, certain years)
- 100 (certain years)
Peugeot
- 205, 206, 207, 208, 308, 405, 406
- 307, 309, 406, 5008
- Partner, Partner Tepee
- 1007, 106
- 301
- Hoggar
- 3008
Mazda
2.
Opel
Corsa (certain years).
Is the Toyota Corolla 4x100?
Toyota Corolla (4×100) 18x7.
Give your Toyota Corolla (4×100) a bold new look with 18x7. 5 inch rims designed for strength, style, and a perfect fit.
