What is the width of the rear end of a 1964 Ford Falcon?
The rear end width of a 1964 Ford Falcon was approximately 58 inches. This classic American compact car had a distinctive design that included a relatively wide rear end, which contributed to its stable and balanced handling characteristics.
Detailed Specifications of the 1964 Ford Falcon
The 1964 Ford Falcon was part of the second generation of this popular model, which was produced from 1960 to 1965. The Falcon was Ford's entry-level compact car, designed to compete with other small vehicles like the Chevrolet Corvair and Volkswagen Beetle.
Some key specifications of the 1964 Ford Falcon include:
- Overall length: 181.2 inches
- Wheelbase: 109.5 inches
- Width: 70.9 inches
- Height: 54.5 inches
- Rear end width: 58 inches
The wide rear end of the 1964 Falcon, measuring 58 inches across, contributed to the car's stable and responsive handling, especially when cornering at higher speeds. This design feature was an important part of the Falcon's appeal as a practical and enjoyable compact car.
The Importance of Rear End Width in Automotive Design
The width of a vehicle's rear end is an important factor in its overall handling and stability characteristics. A wider rear end provides more stability and traction, especially when accelerating or cornering, as it helps to distribute the vehicle's weight more evenly and reduces the risk of fishtailing or losing control.
In the case of the 1964 Ford Falcon, the 58-inch rear end width was considered quite generous for a compact car of that era. This design choice reflected Ford's emphasis on creating a Falcon that was not only practical and affordable, but also enjoyable to drive.
How wide is a Ford Falcon?
| Ford Falcon (FG) | |
|---|---|
| Wheelbase | 2,838 mm (111.7 in) |
| Length | 4,955 mm (195.1 in) (XT) |
| Width | 1,868 mm (73.5 in) |
| Height | 1,453 mm (57.2 in) |
What Fords had a 9 inch rear end?
Common applications
- 1957-1986 Ford F-100 & F-150.
- 1958-1960 Edsel (All series including Wagons)
- 1976-1980 Ford Granada.
- 1976-1979 Lincoln Versailles.
- 1957-1970 Ford Fairlane.
- 1957-1971 Ford Thunderbird.
- 1964 1/2-1973 Ford Mustang.
- 1966-1983 Ford Bronco.
What is the width of a 9 inch Ford rear end?
Common Ford 9" Axle Housing Widths
- 65-66 Mustang = 57.25 inches.
- 67-70 Mustang = 59.25 inches.
- 71-73 Mustang = 61.25 inches.
- 77-81 Versailles = 58.50 inches.
- 67-73 Mustang, Torino, Ranchero, Fairlane = 59.25 inches to 61.25 inches.
- 57-59 Ranchero and Wagon = 57.25 inches.
How wide is the rear axle on a 1965 Falcon?
58 inch wide
The 1964 & 65 Falcon and Comets V8's had a 58 inch wide 8 inch axle. The match from that is the 1977 to 1981 Granada / Monarch had both the 8 and 9 inch axles or the Lincoln Versailles 9 inch rear end the bonus is that they also have Disk Brakes.
What is the width of the axle on a 1963 Ford Falcon?
A stock 63 falcon V8 is 56 inches, the narrowest 8" ford made. Approximate rear end widths measured from backing plate to backing plate.
What is the difference between a 1964 and a 1965 Ford Falcon?
The 1965 Falcons retained the same basic body styles as the 1964 models. Exterior trim treatments and other minor revisions were the basic visual changes. One noteworthy difference on the Futura models in '65 was the use of stainless steel side trim.
What is the width of the rear end of a 64 Falcon?
Re: 64 rear end width
Here it is again,64/65 Comet/Falcon 8" rearend is 58 inches wide! You will need to narrow an 8.8 to fit,most people remove the long axle tube and axle and replace it with a second narrow side tube and axle!
What is the width of a 1960 Falcon rear axle?
The 1963 Falcon and Comets Rear Axles as well as the 1960, 1961, 1962 7 1/4 Axels are suppose to be 55.8 Inch Wide.
What are the dimensions of a 1964 Ford Falcon?
BASIC SPECIFICATIONS Length 181.6" Width 71.6" Height-Hardtop 53.2", Convert. 53.8" Wheelbase 109.5" Curb Weight (approx.)
How wide is a full width axle?
Full width refers to the width of axles out of a full size truck/van. You are correct they do vary quite a bit. Usually a full width is in the neighborhood of 67-69" WMS for front axles and 66-67" for the rear.
