What kind of oil does a 2002 Chrysler Intrepid take?
The standard answer is 5W-30 engine oil for both the 2.7L and 3.2L V6 engines, with an approximate oil capacity around 4.5–5 quarts depending on the engine. Always verify the exact specification in the owner’s manual or on the under-hood label.
Oil requirements by engine
For the 2002 Intrepid, there were two V6 engines in circulation. The following list outlines the standard viscosity and approximate oil capacity for each engine option.
- 2.7L V6: 5W-30 engine oil; oil capacity about 4.5–4.6 quarts (with filter).
- 3.2L V6: 5W-30 engine oil; oil capacity about 5.0 quarts (with filter).
These figures reflect typical service specs; exact capacity can vary slightly by model and oil filter size. Always check the owner's manual or service label under the hood for the precise requirement.
2.7L V6 engine
Oil type: 5W-30; Compatible with conventional or synthetic-blend oils. Use an oil that meets the API service requirements appropriate for Mopar’s 2.7L engines. Typical drain-and-fill intervals align with factory guidance and driving conditions.
3.2L V6 engine
Oil type: 5W-30; Conventional or synthetic-blend acceptable; meets API service standards appropriate for the 3.2L Mopar engine. Oil capacity is roughly 5 quarts with filter; follow the same maintenance schedule and use the correct filter size.
Notes: For extreme temperatures, some owners opt for synthetic-blend 5W-30 to improve cold-start protection or high-temperature stability. Always use the correct filter and torque specifications when performing an oil change. If you're unsure, consult a dealer or mechanic with your vehicle's VIN to confirm the exact specification for your unit.
Maintenance and climate considerations
Before a list: Understanding how climate and usage affect oil choice and change intervals can help you tailor maintenance for the Intrepid. The following list covers best practices for the 2002 model in varying conditions.
- Follow the maintenance schedule in your owner's manual; standard intervals typically range from about 3,000 miles (conventional oil) to 5,000–7,500 miles (synthetic-blend) or as specified by Mopar for your vehicle and engine variant.
- Check oil level regularly and top up if needed; do not overfill.
- Use a good-quality filter and ensure proper torque when installing a drain plug and oil filter.
Conclusion: With the right oil and proper maintenance, either engine option in the 2002 Intrepid can run smoothly, though the 2.7L has particular sludge history concerns, underscoring the importance of timely changes using a reputable oil brand.
Summary
The 2002 Chrysler Intrepid generally uses 5W-30 engine oil regardless of engine choice (2.7L or 3.2L). The approximate oil capacities are about 4.5–4.6 quarts for the 2.7L and around 5 quarts for the 3.2L, with conventional or synthetic-blend formulations acceptable. Confirm exact specs with the owner's manual or under-hood label and follow recommended change intervals for optimal engine health.
What kind of oil does a 2002 Dodge Intrepid take?
STP High Mileage Conventional Engine Oil 5W-30 5 Quart
5W-30.
What kind of oil does a 3.8 L V6 take?
5W-20
What kind of oil does a 2002 Chrysler take?
Notes: Conventional high mileage. 5W-30. 5 quart.
Can you put 5W-30 in a Chrysler 300?
6 Liters Of German RAVENOL DXG 5w30 Motor Oil - Meets the Chrysler MS-6395 motor oil quality standard and viscosity required for the 3.6L Chrysler 300 engine.
