What kind of oil does a 2008 LX570 take?
The LX570's 5.7-liter V8 uses SAE 5W-30 synthetic engine oil (or a high-quality synthetic blend) that meets API SN or newer and ILSAC GF-5 or newer, with an approximate capacity of about 6 quarts including the filter.
In practice, this means choosing a capable, full-synthetic or premium synthetic-blend 5W-30 that carries the API SN or newer designation and ILSAC GF-5 or newer approval. Always verify the exact specification on the oil fill cap or in the owner's manual, especially if the vehicle has been serviced outside typical Nissan/Toyota/Lexus channels or has undergone any modifications. Driving conditions, climate, and whether the vehicle is used for towing or frequent short trips can influence the ideal choice and change intervals.
Oil specifications and viscosity
Key details to guide your selection:
- Oil grade: SAE 5W-30 is recommended for most climates; a high-quality synthetic or synthetic-blend 5W-30 is preferred.
- Standards: Oils should meet API SN or newer and ILSAC GF-5 (or newer) specifications.
- Compatibility: Use oil that is approved for Toyota/Lexus engines; avoid using grades outside the recommended range unless directed by the manual.
Choosing the right oil grade and meeting the certification ensures proper lubrication, cold-start protection, and engine longevity.
Oil capacity and service guidelines
Practical numbers and maintenance guidelines for the 2008 LX570:
- Oil capacity: approximately 6 quarts (about 5.7 liters) with the filter; exact capacity can be confirmed in the owner's manual or on the engine oil fill area.
- Recommended change interval: around every 5,000 miles (8,000 km) for conventional oil, and up to 7,500-10,000 miles for full synthetic under normal conditions; in severe service or with an older engine, err on the side of shorter intervals.
- Oil filter: replace at every oil change.
Always verify the exact capacity and interval in the owner's manual for your vehicle's configuration and driving conditions.
Climate and driving considerations
In hotter climates or when towing heavy loads, maintain a conservative change schedule and ensure the oil remains within the viscosity range specified by Lexus. Synthetic oils offer extra protection for high-load conditions and longer service life, but the base recommendation remains 5W-30.
Summary
For the 2008 LX570, rely on SAE 5W-30 synthetic engine oil (or a high-quality synthetic blend) that meets API SN or newer and ILSAC GF-5 or newer, with an approximate capacity of 6 quarts including the filter. Always consult the owner's manual or the oil filler cap for the exact specification and service intervals, and adjust based on climate and usage.
What kind of oil does a 2008 Lexus use?
Notes: Full synthetic. 5W-30.
What kind of oil does a 2008 Lexus LX 570 take?
2008-2013 Lexus LX 570 5.7L V8 models use ILSAC GF-4 or ILSAC multigrade SAE 0W20 oil type* * Important Note: Owners may choose to use the latest ILSAC GF-6 oil. Toyota Lexus updated the recommended ILSAC multigrade engine oil specification to ILSAC GF-6A, starting in the 2022 model year.
What kind of oil does a lx570 take?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) - 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change. |
|---|---|
| Capacity: | 8.5 quarts (with filter). After refill check oil level. |
What year lx570 to avoid?
Q: Which Lexus LX years should I avoid? There are several years to avoid. We recommend staying away from the 2000, 2003, 2005, 2017, and 2019 selections.
