What kind of oil does a 2010 Chevy Avalanche take?
The recommended oil type for a 2010 Chevy Avalanche is 5W-30 motor oil. This is the factory-specified oil grade that Chevrolet recommends for this model year of the Avalanche pickup truck.
Detailed Oil Recommendations for the 2010 Chevy Avalanche
The 2010 Chevy Avalanche is designed to use 5W-30 motor oil, which is a common viscosity grade for many modern gasoline engines. This oil weight provides the right balance of flow and protection across a wide range of operating temperatures.
Chevrolet also specifies that the oil should meet the following quality standards:
- API Service SN or later
- ILSAC GF-5
These specifications ensure the oil has the proper detergents, anti-wear additives, and other properties to keep the Avalanche's engine running smoothly and efficiently.
Oil Change Interval for the 2010 Avalanche
Chevrolet recommends changing the oil and filter in a 2010 Avalanche every 7,500 miles or 12 months, whichever comes first. However, it's always a good idea to consult your owner's manual for the most up-to-date maintenance schedule and recommendations.
Properly maintaining your 2010 Chevy Avalanche by using the right oil type and changing it at the recommended intervals will help ensure the longevity and performance of this capable pickup truck.
What is the best oil to run in the Chevy 5.3 engine?
Popular Oil Brands for Chevrolet Silverado 1500
ACDelco: This is the recommended oil for the 5.3-liter and 6.2-liter engines, meeting GM's dexos1 specifications for compatibility and performance. Pennzoil Platinum: This has GM's dexos1 approval, performs well in tests, and is another reliable option.
What oil does a 2010 Chevy Avalanche take?
Oil Grade: SEO23
| Viscosity: | 10W-30 (Above 0°C) 5W-30 (All TEMPS) |
|---|---|
| Torque: | 18 ft/lbs (Oil Drain Plug) |
| Notes: | (1) If using E85 or M85 fuels, use AMSOIL of the appropriate viscosity for the OEM recommended drain interval. Extended oil drains can only be extended through oil analysis when these fuels are used. |
Is 5W30 better than 10W30?
The difference, though, is in the first number—the “5” or “10” before the W. This means at below-freezing temperatures, 5W30 is generally thinner (flowier) than 10W30. They also differ in their lowest operating temperature. 5W30 will still flow at temperatures as low as -22°F, while 10W30 will only work until 0°F.
What happens when you put regular oil instead of full synthetic?
Answer. Synthetic oils typically provide better protection than conventional oils, but switching back and forth between full synthetic and conventional oil will not damage the engine. Of course, this depends on the current engine condition and the quality of the conventional oil being used.
What kind of oil does a 5.3 Chevy Avalanche take?
SAE 5W-30
5W-30 (All TEMPS) - SAE 5W-30 is preferred.
Does Chevy require full synthetic oil?
Many modern Chevy vehicles require synthetic oil to help your engine last longer.
What kind of oil does a 2010 Chevy 1500 5.3 take?
In general, the top Chevy Silverado 1500 oil type is SAE 0W-20 full synthetic motor oil from ACDelco's dexos1 standard for 5.3L and 6.2L engines. For the smaller 2.7L TurboMax high-output engine, you'll need SAE 5W-30 full synthetic oil.
How many miles can a 2010 Chevy Avalanche last?
The Chevy Avalanche is one of 23 vehicle models with at least a 20 percent chance of remaining operational to 250,000 miles or beyond, according to the results of a recent study.
What is Dexos oil 5w30?
Dexos oil is made from synthetics or synthetic blends. The idea behind creating dexos oil was to provide exceptional motor cleaning, increased gas mileage, extended drain interval, and reduced sludge formation.
What weight oil goes in a 5.3 Vortec?
If your 2024 Silverado is powered by a 5.3-liter V8 engine, it's important to use SAE 0W-20 viscosity grade motor oil.
