What kind of oil does a 2010 Subaru Tribeca take?
The 2010 Subaru Tribeca takes 5W-30 synthetic motor oil. This is the recommended oil type and viscosity for this vehicle according to the owner's manual and Subaru's specifications.
Detailed Answer
The 2010 Subaru Tribeca is a midsize crossover SUV that was produced by Subaru. When it comes to the recommended motor oil, Subaru specifies that the Tribeca should use 5W-30 synthetic oil.
The 5W-30 oil weight refers to the oil's viscosity, or thickness. The "5W" indicates the oil's cold weather performance, while the "30" refers to the oil's viscosity at normal operating temperatures. Synthetic oils are engineered to provide better protection, improved fuel efficiency, and longer service life compared to conventional mineral-based oils.
Oil Change Interval
Subaru recommends changing the oil and filter in the 2010 Tribeca every 7,500 miles or 6 months, whichever comes first. However, it's always a good idea to check your owner's manual for the most up-to-date maintenance schedule.
Oil Capacity
The 2010 Subaru Tribeca has an oil capacity of 4.9 quarts (4.6 liters). When changing the oil, be sure to use the correct amount of 5W-30 synthetic motor oil specified by Subaru.
Tips for Maintaining Your Tribeca's Oil
- Use only the recommended 5W-30 synthetic motor oil
- Change the oil and filter at the intervals specified in your owner's manual
- Check the oil level regularly and top up as needed
- Avoid mixing different types of motor oil
- Consider using a high-quality oil additive to enhance performance and protection
By following Subaru's recommendations for motor oil type and maintenance, you can help ensure your 2010 Tribeca runs smoothly and efficiently for years to come.
What is the best oil to run in a Subaru?
Recommended Subaru Outback Oil Type
For engines that aren't turbo-charged, 0W-20 synthetic oil is your best Subaru Outback oil type. For older Subaru Outback models, the engine will thrive with a higher viscosity, so if your Outback has seen some miles and years, you can choose 5W-30 synthetic oil.
What kind of oil does a Subaru Tribeca take?
Synthetic 5W-30
Castrol EDGE Synthetic 5W-30 Engine Oil 5L - 3421196.
What kind of oil does a 3.6 take?
The recommended oil type for the 2024 Jeep 3.6 Pentastar engine is 5W-30 full synthetic motor oil.
Can I put 5w30 in my Subaru?
5W-30 synthetic motor oil is required for 2011 and newer turbo-charged Subaru vehicles.”
How much oil does a 3.6 L Subaru engine take?
6.9 quarts
In this automobile, the oil capacity depends on which type of engine you have. For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts.
How much oil does a Subaru Tribeca 3.6 take?
Capacity: 6.9 quarts (with filter).
What kind of oil does a 2010 Subaru take?
Subaru Outback 2002 to 2012: 5W-30 Conventional Oil. Subaru Outback 2013 to 2023: 0W-20 Synthetic Oil. Subaru Outback (6-Cylinder) 2002 to 2019: 5W-30 Conventional Oil. Subaru Outback (6-Cylinder) 2020 to 2023: 5W-30 Synthetic Oil.
How many miles will a Subaru Tribeca go?
While results will vary and the big variable is always how well the car has been maintained, what I can tell you is a Subaru is capable of going 300,000 miles. And if you are a regular maintenance type of owner you should expect to get that type of mileage out of it.
Why does Subaru use 0W-20 oil?
The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
What oil does a 2010 Subaru Tribeca take?
Synthetic 5w-30 oil
2010 Subaru Tribeca Synthetic 5w-30 oil gallon - SOA427V1415 - Genuine Subaru Part.
