What kind of oil does a Dodge Caliber 2.0 take?
The Dodge Caliber 2.0 typically uses 5W-20 engine oil as the standard grade.
In practice, the exact viscosity and capacity can vary by year and climate. Oils should meet API SN (or newer) and ILSAC GF-5 standards, and many engines require a specification specified by Mopar/Chrysler. Always verify with your vehicle’s owner’s manual or a trusted dealership for your specific year and region.
Recommended oil grades for the Caliber 2.0
Below are the oil viscosity options commonly approved for the 2.0-liter engine and the typical contexts in which you’d choose them.
Choosing the right viscosity for your climate
5W-20 is the primary and most widely recommended grade for standard driving in a wide range of temperatures. 5W-30 can be used as an alternative if 5W-20 isn’t available or if the manual for your year specifies it for hot climates or heavy-load conditions. In all cases, oils should meet API SN (or newer) and ILSAC GF-5 standards and, when applicable, Chrysler/Mopar specifications.
- 5W-20: The default grade for most Caliber 2.0 models. Can be conventional or synthetic, but must meet the appropriate API/ILSAC and (if required) Mopar specification.
- 5W-30: Acceptable alternative for certain climates or if your manual specifically recommends it for your year. Also must meet API SN (or newer) and ILSAC GF-5 standards.
When selecting oil, always follow the exact specifications listed in your owner’s manual and ensure the oil meets the vehicle’s required Chrysler/Mopar standard.
Oil capacity and change intervals
Oil capacity and maintenance intervals depend on year, oil type, and driving conditions. The following ranges provide a practical guide, but your manual should be your primary reference.
- Conventional 5W-20: typically serviced every 3,000–5,000 miles, depending on driving conditions and factory guidance.
- Synthetic 5W-20: typically serviced every 5,000–7,500 miles, subject to driving conditions and manual recommendations.
Always refer to the owner’s manual for the exact interval and monitor oil level regularly between changes.
Practical tips for ensuring proper oil health
Small steps can help protect the engine and maintain performance over time.
- Use the correct viscosity and a fresh oil filter when changing oil.
- Keep an eye on oil level with the dipstick and address low readings promptly.
- Dispose of used oil responsibly at an approved recycling point.
Following these practices helps ensure the engine remains properly lubricated and compliant with manufacturer guidelines.
How to verify the specification for your vehicle
Since production years and regions can vary, confirm the exact specification for your Dodge Caliber 2.0 by checking:
- Your vehicle’s owner's manual, under the Lubrication section.
- On-chassis labels near the engine bay or oil fill cap that may list recommended viscosity and oil approvals.
- With a dealership or Mopar customer service for year-specific guidance.
Using the correct oil specification ensures optimal lubrication, efficiency, and warranty compliance for your particular model.
Summary
The Dodge Caliber 2.0 commonly requires 5W-20 motor oil as the standard grade, with 5W-30 as a viable alternative under certain conditions. Ensure the oil meets API SN or newer and any Mopar-specific specifications, and consult your owner’s manual for the exact viscosity, capacity, and change intervals corresponding to your year and climate. Regularly verify oil level and follow maintenance guidelines to keep the engine running smoothly.
What kind of oil does a Dodge Caliber take?
Mobil 1 – Extended Performance 5W-20 Full Synthetic Motor Oil, Prevents Leaks, 5 Quart (Part No. 15020)
What kind of oil does a 2007 Dodge Caliber take?
Oil Grade: API*
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.3 litres (with filter). After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
How much oil does a Dodge Caliber 2.0 take?
4.5 quarts (with filter). After refill check oil level.
How much oil does a 2.0 4 cylinder engine take?
Approximately 5.1 quarts
2.0L turbocharged engine: Approximately 5.1 quarts of oil.
