What kind of transmission fluid does a 2017 Dodge Journey use?
The 2017 Dodge Journey uses Mopar ATF+4 automatic transmission fluid. This is a specific type of fluid recommended by Dodge for the Journey's 6-speed automatic transmission. The correct fluid type and regular fluid changes are important for the proper functioning and longevity of the vehicle's transmission.
Transmission Fluid Details
The 2017 Dodge Journey is equipped with a 6-speed automatic transmission. Dodge specifies that this transmission requires the use of Mopar ATF+4 fluid. ATF+4 is a synthetic automatic transmission fluid that meets the requirements for Chrysler's automatic transmissions.
- Fluid Type: Mopar ATF+4
- Transmission: 6-speed automatic
- Fluid Capacity: Approximately 7.5 quarts
It's important to use the correct fluid type recommended by the manufacturer. Using the wrong fluid can lead to transmission problems and premature wear. Regular fluid changes, typically every 30,000 miles or as specified in the owner's manual, are also crucial for maintaining the transmission's health.
Transmission Fluid Change Procedure
- Park the vehicle on a level surface and apply the parking brake.
- Locate the transmission fluid drain plug, usually on the bottom of the transmission case.
- Place a drain pan underneath and remove the drain plug to allow the old fluid to drain out.
- Once the fluid has drained, replace the drain plug and tighten it securely.
- Locate the transmission fluid fill plug, usually on the side of the transmission case.
- Using a fluid transfer pump, slowly add new Mopar ATF+4 fluid through the fill plug until it begins to drip out.
- Replace the fill plug and tighten it securely.
- Start the engine and let it idle for a few minutes to circulate the new fluid.
- Check the fluid level and add more if necessary until it reaches the proper level.
Consult your owner's manual or a professional mechanic if you're unsure about the transmission fluid change procedure for your 2017 Dodge Journey.
