What lug pattern does a Honda CRV have?
The Honda CR-V typically uses a 5x114.3 mm lug pattern.
Across most generations and markets, the CR-V adheres to a 5-lug bolt pattern on a 114.3 mm circle. The hub bore is commonly around 64.1 mm, but small variations can occur by year or regional specification. This article explains the standard pattern, what to check when buying wheels, and how to confirm the exact specification for your vehicle.
Pattern basics
Understanding the core specifications helps when sourcing replacement wheels or adapters. The CR-V’s standard configuration is a five-lug bolt pattern on a 114.3 mm circle, with a typical center bore around 64.1 mm. Always verify the exact numbers for your model year and market to ensure proper fitment.
Consistency across generations
For most Honda CR-V generations sold in major markets, the bolt pattern remains 5x114.3. While wheel compatibility is very high within this pattern, some details such as the center bore can vary slightly by year, trim, or regional production.
Key specifications to consider when selecting wheels or adapters include bolt pattern, center bore, and overall wheel offset. The following list summarizes these core specs you should check before purchasing wheels or applying adapters.
Key specifications to know when shopping for wheels:
- Bolt pattern: 5 on 114.3 mm (5x114.3).
- Center bore: typically 64.1 mm; use hub-centric rings if your wheel has a different bore.
- Number of lugs: 5.
In short, when replacing wheels or selecting aftermarket options, expect a 5x114.3 pattern and verify hub bore and offset for your exact vehicle.
Verifying for your exact vehicle
To ensure you match the correct lug pattern for your CR-V, use the steps below. This helps prevent buying wheels that don’t fit or require spacers.
- Check the owner's manual or the tire information placard on the driver’s door jamb for the official bolt pattern and hub bore.
- Inspect the existing wheels and measure the diameter of the circle through the centers of the lug holes to confirm 114.3 mm (5x114.3).
- Measure the center bore of the wheel opening on your hub; typical CR-V hubs are around 64.1 mm. If your wheel has a different bore, you’ll need hub-centric rings for a proper fit.
- If in doubt, contact a Honda dealer or refer to the official parts catalog for your exact model year and market to confirm the pattern.
Accurate verification helps ensure that new wheels or adapters fit correctly and safely, reducing the risk of vibration or improper seating.
Additional notes by market
While the 5x114.3 pattern is standard for most Honda CR-V models sold globally, there can be regional variations in center bore sizes or small deviations due to market-specific manufacturing. If you’re shopping in a market outside the main U.S./Canada/Japan production, double-check the exact specification for your vehicle’s year and trim.
When replacing wheels, it’s also wise to confirm compatibility with your vehicle’s brake rotor size, offset, and load rating. Many wheels marketed for 5x114.3 fit across multiple Honda models, but you should verify offset and brake clearance for your exact setup.
Summary
The Honda CR-V predominantly uses a 5x114.3 mm lug pattern (five lugs on a 114.3 mm bolt circle), with a common center bore around 64.1 mm. Always verify the exact pattern, center bore, and offset for your specific year and market by consulting your owner’s manual, the door placard, or an official parts catalog, especially if you’re buying aftermarket wheels or adapters.
What is the bolt pattern on a Honda CRV?
The Honda CR-V uses a 5x114.3 mm bolt pattern for most of its generations, which is also known as 5x4.5 inches. However, the latest generation (2022-2025) uses a 5x120 mm bolt pattern.
- 5x114.3 mm bolt pattern: This pattern is used on most Honda CR-V models from approximately 2001 through 2021.
- The "5" indicates there are 5 bolt holes.
- The "114.3" is the diameter in millimeters of the imaginary circle on which the bolt holes are located.
- 5x120 mm bolt pattern: The 2022-2025 CR-V models use this different bolt pattern.
- It is crucial to verify the correct bolt pattern for your specific model year before purchasing new wheels.
What Hondas have 4x100?
Compatibility and Suitability: The 4x100 bolt pattern is predominantly found in compact and subcompact Honda models, such as older Civic models, the Fit, CRX, Insight, Del Sol, Prelude, and City. It's crucial to verify the bolt pattern for your specific vehicle model and year.
What is the bolt pattern on a 2007 Honda CRV?
The 2007 Honda CR-V has a lug pattern of 5x114.3 mm, which is equivalent to 5x4.5 inches. This means there are 5 lug bolts on a circle with a diameter of 114.3 mm.
- Bolt Pattern: 5x114.3 mm or 5x4.5 inches
- Number of Lugs: 5
- Center Bore: 64.1 mm
- Offset: 50 mm
What rims will fit on a Honda CRV?
Sixth Generation (2023-Present)
- Standard rim sizes: LX/Sport trims: 17 x 7.5 inches. EX-L trim: 18 x 7.5 inches. Touring/Sport Touring trims: 19 x 7.5 inches.
- Bolt pattern: 5×114.3mm.
- Center bore: 64.1mm.
- Offset: 45mm.
- Common tire sizes: 235/65R17, 235/60R18, 235/55R19.
