What oil does the 5.7 L tundra take?

The 5.7 L Toyota Tundra typically uses SAE 0W-20 full synthetic oil in most modern model years, though some older years or markets may specify 5W-30. Always verify with the owner’s manual or the oil cap.

Oil type and grade for the 5.7 L V8 Tundra

The engine’s lubrication needs are determined by year, market, and climate. In the latest guidance, Toyota commonly recommends 0W-20 full synthetic for the 5.7 L Tundra, with 5W-30 appearing as an option in certain older iterations or regional variants. The exact grade and capacity can vary, so the owner’s manual remains the definitive source.

Below is a quick reference of the most commonly cited oil grades for the 5.7 L Tundra by era. Note that exact specification can vary by market and year; always verify.

• Most modern 5.7 L Tundra engines: SAE 0W-20 full synthetic (API SN/ILSAC GF-5 or equivalent).


• Earlier model years or certain markets: SAE 5W-30 full synthetic or synthetic blend.

Using the recommended grade helps ensure proper lubrication, fuel efficiency, and warranty compliance. Follow the OEM-specified intervals for oil changes.

How to confirm the exact oil for your truck

To avoid ambiguity, use these steps to verify the precise grade for your Tundra:

• Check the owner's manual: Look under Engine Oil or Maintenance Schedule for the exact viscosity and specification (e.g., 0W-20, API SN, ILSAC GF-5).


• Inspect the engine oil fill cap: Some caps indicate the recommended viscosity (for example, 0W-20).


• Use the Toyota Owners portal or contact a Toyota dealer: Provide your VIN to get model-year-specific guidance.


• Consider your climate and usage: If you tow, drive in extreme heat, or use the truck in severe service, the dealer may recommend a different grade within the approved range.

Following official guidance ensures you're using the correct oil for your vehicle and region.

Summary

The 5.7 L Tundra typically uses a full synthetic oil, most commonly SAE 0W-20 for modern models, with 5W-30 as an alternative for older years or certain markets. Always verify the exact specification from the owner's manual or the oil cap, and use the recommended change intervals to protect the engine.

What oil does a 5.7 V8 tundra take?

It's recommended that you use a 0W-20 fully synthetic car oil.

What oil is recommended for a Toyota Tundra?

For the 2019 Toyota Tundra 5.7L, use SAE 0W-20 synthetic oil to ensure optimal engine performance and fuel efficiency. Regular oil changes every 5000 to 7500 miles help prevent sludge buildup and reduce wear. Always check the owner's manual for specifications.

What oil does a 5.7 L V8 take?

The correct oil for a 5.7L engine is SAE 0W-20 synthetic oil for newer models (starting around 2019/2022) and SAE 5W-20 synthetic blend for older models (e.g., 2009-2018). Always check your owner's manual and the oil cap for the most accurate recommendation, as it's the definitive source for your specific vehicle's requirements. 
For newer models (approx. 2019+):

• Oil Type: SAE 0W-20 full synthetic oil. 
• Recommendation: Some sources suggest using 0W-20 over 5W-20 as the factory has switched, and it offers better performance in cold weather. 

For older models (approx. 2009-2018):

• Oil Type: SAE 5W-20 synthetic or synthetic blend oil. 
• Recommendation: This is the original viscosity recommended for these engines. 

Important considerations

• Check the oil cap: The most accurate viscosity is printed directly on the oil filler cap of your engine. 
• Follow manufacturer specifications: Use oil that meets the manufacturer's specific quality specification, such as MS-6395 for some Ram trucks. 
• Consider your climate: While manufacturers recommend a specific oil, climate can influence your choice. If you live in a very hot climate, some people prefer a slightly thicker oil like 5W-30 for better protection under heavy loads, such as towing. 
• Use a full synthetic: Full synthetic oils provide better protection and performance, especially in varying temperatures, and often allow for longer oil change intervals. 

Can you put 5W-30 in a Toyota Tundra?

The manufacturer recommends full synthetic 5W-30 oil.
It fits your truck perfectly, and it's specially designed for your Tundra.