What rear axle is in a 2003 F-350?
The 2003 Ford F-350 is a heavy-duty pickup truck known for its impressive towing and hauling capabilities. At the heart of this vehicle's robust performance is its rear axle, a critical component that plays a crucial role in the truck's overall functionality.
The Dana 60 Rear Axle
The 2003 Ford F-350 is equipped with the Dana 60 rear axle, a heavy-duty design that has been a staple in Ford's lineup of heavy-duty trucks for decades. The Dana 60 is renowned for its exceptional strength and durability, making it well-suited for the demands of towing and hauling heavy loads.
The Dana 60 rear axle features a robust housing, a high-strength differential, and heavy-duty axle shafts. This design allows the F-350 to handle the increased stress and strain associated with towing trailers, hauling construction materials, or navigating rough terrain.>
Key Specifications of the Dana 60 Rear Axle
- Axle housing: Heavy-duty cast iron construction
- Differential: High-strength, limited-slip design
- Axle shafts: Forged, heat-treated steel for maximum durability
- Gear ratio: Typically 3.73:1 or 4.10:1, depending on the specific model and configuration
- Towing capacity: Up to 12,000 pounds when properly equipped
The Dana 60 rear axle is a critical component that contributes to the 2003 Ford F-350's impressive towing and hauling capabilities. Its robust design and heavy-duty construction make it well-suited for the demands of commercial and recreational use.
How do I identify my Ford Rear Axle?
The ID tag can be your friend. It will tell you the gear ratio, rearend style, and whether it has limited-slip. Also on the tag is an ID number, which, until 1985, included four to five letters, no numbers. Almost all 8.8s—and all post-1986 Ford rearends—have letters and numbers.
What is a Sterling 10.25 rear end?
The Sterling 10.25 is a solid rear axle with a full-floating design. This means the axle shafts do not bear the weight of the vehicle, allowing the axle to handle heavier loads without undue stress on the shafts themselves.
What year is the Sterling 10.5 axle?
1999-2016 Ford Sterling 10.5" Rear Axle Identification IDN-141. The Ford Sterling 10-1/2" Rear Full-Floating Axle was introduced in 1999 along with the new Super Duty F250 and F350. It shares some parts with the similar 10-1/4" Sterling Rear Axle which Ford used from 1985 to 1997 in the F250 and F350.
Is the Sterling 10.5 a good axle?
At the end of the day, the Sterling 10.5 isn't a bad rear axle, it simply has a weak spot that needs to be addressed. We're even willing to go out on a limb and say it's one of the best-value full-float axles available. Well, next to the GM 14-bolt, of course. Oh, yes.
How do you identify a Dana 80 axle?
The Dana/Spicer Model 80 is an automotive axle manufactured by Dana Holding Corporation and has been used in OEM heavy duty applications by Chevrolet, Dodge, and Ford. It can be identified by its straight axle tubes, 10 bolt asymmetrical cover, and a "80" cast into the housing.
Is a sterling 10.5 a Dana 60?
The Sterling 10.5 axle is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in model year 1985 Ford trucks. The axle was developed to replace the Dana 60 and Dana 70.
How do I know what axle my F350 has?
Step 1: Locate the Axle Code
- View the Safety Compliance Certification Label on the driver's side, front or rear door panel.
- Find the word AXLE under the bar code.
- Find the two-digit code under AXLE.
What Ford trucks have Dana 60 axles?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4x4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
How do I identify my Ford rear axle?
The ID tag can be your friend. It will tell you the gear ratio, rearend style, and whether it has limited-slip. Also on the tag is an ID number, which, until 1985, included four to five letters, no numbers. Almost all 8.8s—and all post-1986 Ford rearends—have letters and numbers.
What rear axle is in a 2003 F350?
1999-2016 Dana 80 Dual Rear Wheel Rear Axles in Ford F-350, F-450 Super Duty trucks and motorhome chassis have a Bill of Material Number (BOM) stamped on a Build Tag (red arrow) attached to the differential by two of the differential cover bolts (yellow arrows).
