What rims will fit on a Chevy Cruze?
Rims that fit a Chevy Cruze must match the vehicle’s core mounting specs: a 5x110 mm bolt pattern, a center bore of 64.1 mm, and an appropriate offset and width for the model year and trim. In practice, most Cruze models will accommodate wheels from roughly 15 to 18 inches in diameter, with widths from about 6.5 to 8 inches, as long as the offset and brake clearance are correct. Always verify compatibility for your specific VIN and year before purchasing.
Rim compatibility basics
To start, understand the core measurements that determine fit for the Cruze. The key numbers to verify are bolt pattern, center bore, offset, and wheel width/diameter. The following list summarizes the essential specifications that govern whether a given rim will fit your Cruze.
- Bolt pattern: 5x110 mm
- Center bore: 64.1 mm
- Hub-centric rings: use if the wheel bore is larger than 64.1 mm to achieve proper centering
These foundational specs determine whether the wheel can mount on the hub and align properly with the axle and brakes. Any mismatch here can prevent installation or cause vibrations and alignment issues.
Offset and sizing considerations
Offset and wheel width influence how far the rim sits inboard or outboard relative to the hub, which affects brake clearance, fender clearance, and steering geometry. The Cruze generally requires a fairly moderate positive offset, and choosing the right width helps avoid rubbing the struts, calipers, or fenders. The list below outlines the typical sizing parameters to aim for.
- Offset: roughly +38 to +45 mm, depending on year and trim
- Wheel width: commonly 6.5 to 8.0 inches
- Wheel diameter: commonly 15 to 18 inches (stock configurations vary by trim and generation)
Keeping the offset in this typical range helps preserve steering feel, suspension geometry, and correct wheel track. Deviating far outside these ranges can lead to rubbing, altered speedometer readings, or tire wear issues.
Common wheel sizes by era
Here are typical diameter options you may encounter on Cruze models, with the understanding that exact availability depends on model year and trim. Factory wheels generally ranged from 15 to 18 inches, with larger options appearing on higher trims and sport packages.
- 15-inch wheels: commonly found on base or winter setups; often steel wheels
- 16-inch wheels: widely used across several trims and model years
- 17-inch wheels: frequently offered on mid- to upper-trim levels or sport variants
- 18-inch wheels: available on many higher trims and some mid-generation packages; check brake clearance for your setup
In practice, the most reliable approach is to match the wheel diameter to what the specific trim and year originally used, then verify offset and clearance for any aftermarket options. Aftermarket 19-inch wheels exist for Cruzes in some markets, but they require careful fitment checks for brake clearance and suspension geometry.
Practical steps to verify fit
Before you buy or mount rims, follow these verification steps to reduce the risk of fit issues or safety concerns.
- Confirm the wheel’s bolt pattern matches the Cruze’s 5x110 mm
- Measure or confirm center bore is 64.1 mm; plan for hub-centric rings if necessary
- Ensure the offset falls within the +38 to +45 mm range suitable for your year and trim
- Check that the wheel width and overall diameter won’t cause rubbing against the fenders, calipers, or suspension components
- Verify tire size compatibility and maintain an overall diameter within a few percent of stock to avoid speedometer and ABS issues
- Confirm lug-nut type and seat match your wheel; follow torque specifications from the vehicle manufacturer
- Ensure the wheel’s load rating and speed rating are appropriate for the vehicle and intended use
Following these checks helps ensure a safe, reliable fit and reduces the likelihood of unwanted handling changes or clearance problems.
Summary
For a Chevrolet Cruze, compatible rims share a 5x110 mm bolt pattern, a 64.1 mm center bore, and an offset typically in the +38 to +45 mm range, with wheel diameters usually spanning 15 to 18 inches and widths around 6.5 to 8 inches. Exact compatibility depends on the model year and trim, so always verify the VIN and consult fitment guides or a wheel specialist. When in doubt, test-fit and use hub-centric rings if the bore differs to maintain proper centering and safety.
What's the bolt pattern on a 2015 Chevy Cruze?
The 2015 Chevy Cruze bolt pattern is 5x105 for the gasoline models. However, some 2015 diesel models use a different bolt pattern of 5x115. Always verify the specific bolt pattern for your vehicle before purchasing new wheels.
You can watch this video to learn how to change the wheel bolt pattern: 56sStreamline BuildsYouTube · Jun 7, 2023
- Gasoline models: 5x105
- Diesel models: 5x115
Note: Some sources may list 5x115 for all 2014-2015 Cruzes, but this is generally for the diesel versions. It is essential to confirm which engine your vehicle has to ensure you get the correct bolt pattern.
What cars have bolt pattern 5x105?
Cars with a 5x105 bolt pattern include many models from Chevrolet and Buick, such as the Chevrolet Cruze, Sonic, and Volt, and the Buick Encore and Verano. Other vehicles that use this pattern include the Buick Excelle and Chevrolet Trax.
Chevrolet
- Cruze: 2011–2023
- Sonic: 2012–2020
- Volt: 2011–2019
- Trax: 2013–2022
Buick
- Encore: 2013–2023
- Verano: 2012–2017
Other vehicles
- Excelle GT: 2015–2023
- Excelle GX: 2018–2021
- Velite 5: 2017–2018
- Velite 7: 2020–2023
How do I know what rims can fit my car?
To find the right rims for your car, first check the bolt pattern and offset, which are crucial for a proper fit. You can find these specifications on the sticker inside the driver's door, in the owner's manual, or on the sidewall of your current tires. You can also use a vehicle-specific online fitment tool from a reputable retailer.
This video explains how to find the bolt pattern and offset of your car's wheels: 41sHolleyYouTube · Oct 2, 2021
1. Determine your car's specifications
- Sticker in the door: Look for a sticker inside the driver's door jamb, as it often lists the recommended tire and rim size.
- Owner's Manual: The manual contains detailed specifications for your vehicle, including the bolt pattern and other critical measurements.
- Online fitment tools: Many online wheel and tire retailers have tools where you can input your car's year, make, model, and trim to see compatible options.
2. Understand the key measurements
- Bolt Pattern: This is the number of lug holes and the diameter of the circle they form (e.g., 5x114.3). It must match exactly to mount the wheel to the hub.
- Wheel Diameter: Look for the diameter on your current tire's sidewall (e.g., the "15" in "R15"). The wheel must be the correct diameter to fit your vehicle and clear components like the brakes.
- Wheel Width: This refers to the distance between the two bead seats on the wheel. It affects tire fitment and handling. You can measure it from your current wheel or find it in your owner's manual.
- Offset: This is the distance from the wheel's mounting surface to the center line of the wheel. It determines how far the wheel sits inside or outside the fender. Incorrect offset can cause rubbing on suspension or body parts.
3. Take the measurements
- If you have your old wheels: You can find the bolt pattern and other specs stamped on the back of the wheel or in the owner's manual.
- For more precise measurements: You may need to measure the distance from the mounting surface to the inside of the fender for backspacing, and the distance from the mounting surface to the outside of the fender for front spacing, to confirm clearance.
4. Consider professional advice
- Consult an expert: If you are unsure about any of these measurements or specs, it's best to consult a professional. Incorrect wheel fitment can lead to vibration, damage, or unsafe driving conditions.
- Check with retailers: Reputable retailers can help ensure you get the correct size and type of rims for your car, says Les Schwab Tires.
What wheels will fit a Chevy Cruze?
The Chevy Cruze has a range of stock rim sizes, including 15-inch rims, 16-inch rims, 17-inch rims and 18-inch rims.
