What size are stock Dodge Charger wheels?
There isn’t a single wheel size for the Dodge Charger. Stock wheels have ranged from 17 inches up to 20 inches across its generations and trims, with base models typically on smaller diameters and high-performance variants featuring larger wheels.
The Charger has evolved through multiple generations since its revival in 2005, and wheel size has been adjusted to match performance, styling, and tire technology. This article outlines the general patterns by era and trim, and explains how to confirm the exact stock size for a specific car.
Overview of wheel sizes by generation
Across the Charger’s generations, wheel diameters have varied from 17 inches on base models to 20 inches on modern high-performance variants. The exact size depended on production year, trim level, and optional packages.
First generation (2005–2010)
Early Chargers offered a range from 17-inch wheels on base models to larger diameters on sport-oriented trims as part of optional packages. High-performance variants were sometimes equipped with bigger wheels, but the core wheel sizes commonly stayed in the mid-teens to 18 inches.
Second generation and newer (2011–present)
In this era, wheel options expanded significantly. Most trims could be found with 18- or 19-inch wheels, while the upper-performance variants frequently rolled out with 20-inch wheels as standard or optional equipment. The lineup grew to accommodate both daily driving comfort and track-ready performance aesthetics.
Common stock sizes by trim
The following ranges reflect typical configurations seen in many model years. Exact sizes can vary by year and option package, so always verify with the door placard or VIN-based build sheet.
- Base/entry trims: typically around 17 inches
- Mid-range trims (SXT/GT): commonly 18–19 inches
- Performance-oriented trims (RT, Scat Pack, SRT, Hellcat): commonly 20 inches
These ranges illustrate common configurations across the Charger lineup. Specific models and years may deviate, so checking the original equipment for your particular car is the best way to be sure.
How to verify your Charger’s stock wheel size
To ensure you have the correct wheel size for replacement or compatibility, use these steps to confirm the exact stock specification for your particular car.
- Check the door jamb placard: This sticker lists the wheel and tire sizes that came from the factory for your VIN.
- Consult the owner's manual or the official build sheet for your year and trim: These documents specify the standard wheel size for the model as delivered.
- Inspect the wheel itself: Many wheels have markings such as “XJxYY” (where X is width and YY is diameter) cast or stamped on the wheel face or backside.
- If you’re unsure, contact a Dodge dealership or use a VIN lookup service: They can provide a model-year and trim-specific specification list tied to your exact vehicle.
When upgrading or changing tires, consider also load rating, offset, and clearance to avoid rubbing or handling changes. Matching the stock diameter helps preserve speedometer accuracy and ride quality.
Summary
The Dodge Charger has used wheel sizes ranging from 17 to 20 inches across its history, with base trims typically on smaller wheels and higher-performance variants on larger ones. Because sizes vary by year, trim, and options, the most reliable way to know your exact stock wheel size is to check the door placard, the owner's manual, the build sheet, or your VIN-specific dealership documentation. Keeping to the original diameter helps maintain proper handling, ABS calibration, and tire performance.
What is my stock rim size?
One way to determine the rim size for your vehicle is to look at the alphanumeric tire size code located in the owner's manual, driver's side door jamb, or inside the glove box door. Look for a code like P215/65 R15 95H.
What size rims are on a 2019 Dodge Charger?
What size rims come on a Dodge Charger? The Dodge Charger comes with a range of wheel size options, including 17-inch rims, 18-inch rims, 19-inch rims and 20-inch rims, depending on its year model and trim level. Regardless of its rim diameter, your Charger rims will feature a 5x115 bolt pattern.
What size tires are on a Dodge Charger?
Dodge Charger tire sizes vary by trim, but common sizes include 215/65R17 for base models, 245/45R20 for many performance trims like the R/T and GT, and 305/35R20 for the widebody variants such as the SRT Hellcat and Scat Pack Widebody. To ensure you get the correct size, it is crucial to check your specific model's trim level and the size listed on the driver's side door jamb or owner's manual.
Examples of Dodge Charger tire sizes by trim
- SXT (RWD): 215/65R17 or 245/45R20
- GT: 245/45R20
- R/T: 245/45R20
- Scat Pack: 245/45R20 or 275/40R20
- Scat Pack Widebody: 305/35R20
- SRT Hellcat Widebody: 305/35R20
- SXT AWD: 235/55R19 or 245/45R20
What is the bolt pattern on a 5 lug Dodge Charger?
The 5-lug bolt pattern for a Dodge Charger is 5x115mm (or 5x4.53 inches) for all models from 2005 to the present. This is a common pattern used on many modern Chrysler and Dodge vehicles, including the Charger, Challenger (2008-present), and Chrysler 300 (2005-present).
- Bolt pattern: 5×1155 cross 1155×115 mm
- Thread size: M14 x 1.5
- Center bore: 71.6 mm
- Torque: 130 lb-ft
