What size are the lug nuts on a 2017 Chevy Traverse?
The lug nuts on a 2017 Chevy Traverse typically measure 14mm in size. This is the standard lug nut size for this particular model year and make of vehicle.
Detailed Information on 2017 Chevy Traverse Lug Nuts
The 2017 Chevy Traverse is a midsize SUV that was produced by General Motors. When it comes to the lug nuts, or the nuts that secure the wheels to the vehicle, the standard size used on this model is 14 millimeters (mm).
This 14mm lug nut size is common across many Chevrolet vehicles, including other Traverse model years as well as other SUV and truck models. The 14mm size provides the necessary strength and durability to safely secure the wheels while also allowing for easy installation and removal when changing a tire.
Why Knowing the Lug Nut Size is Important
Knowing the correct lug nut size for your vehicle is important for a few key reasons:
- Tire Changes: When changing a flat tire or rotating your tires, you'll need the right size lug wrench to properly loosen and tighten the lug nuts.
- Wheel Replacement: If you're installing new wheels, you'll need to ensure the lug nuts fit the new wheels securely.
- Safety: Properly tightened lug nuts are crucial for maintaining wheel integrity and preventing the wheel from coming loose while driving, which could lead to a dangerous situation.
Referring to your owner's manual or contacting your local Chevy dealer can help confirm the exact lug nut size for your 2017 Traverse if you're ever unsure.
What size are the wheel nuts on a Chevy Traverse?
22mm Hex
Wheel Nut M14-1.50 Flattop Nut – 22mm Hex, 44.5mm Length.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What type of socket is used when removing lug nuts?
A good mechanic will be using black impact sockets and will not just run the lug nut down with the wrench set on high, but finish tightening the lug nuts with a torque wrench.
Can you use 7/8 instead of 22mm?
A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
What size wrench do I need to remove lug nuts?
For lug nuts, a 1/2-inch or even 3/4-inch impact wrench is a better choice.
What size socket do I need for lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What is Chevy lug nut size?
There are various wheel nuts for Chevy sedans, SUVs, and trucks in the market. Most Chevy vehicles use steel wheel nuts. The most common thread sizes that are used by Chevy cars are M14x1. 5, 1/2-20 UNF, M12x1.
What size are the lug nuts on a 2019 Chevy Traverse?
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Flattop Capped, 1.752″ Length, Chrome (Sold by each)
What size socket is a Chevy Traverse lug nut?
How to Torque Lug Nuts on Your Chevrolet Traverse. Gather Tools: You'll need a torque wrench, the correct size socket (typically 19mm or 21mm), and your owner's manual for reference.
