What size are the lug nuts on a 2017 Ford Expedition?
When it comes to maintaining your 2017 Ford Expedition, knowing the correct lug nut size is essential for tasks like changing a tire or upgrading your wheels. Using the wrong size can lead to improper fitment, damage to the wheel, or even safety hazards. In this article, we’ll provide you with the accurate lug nut size for the 2017 Ford Expedition and explain why this information is important for vehicle maintenance.
The Lug Nut Size for a 2017 Ford Expedition
The 2017 Ford Expedition uses lug nuts with the following specifications:
- Thread Size: M14 x 2.0
- Hex Size: 21 mm
- Seat Type: Conical (also known as tapered or acorn seat)
These specifications ensure that the lug nuts fit securely onto the wheel studs and provide the necessary clamping force to keep the wheels attached to the vehicle. Always double-check these details when purchasing replacement lug nuts or wheel accessories.
Why Knowing the Correct Lug Nut Size Matters
Using the correct lug nut size is crucial for several reasons:
- Safety: Properly fitting lug nuts ensure that your wheels are securely attached, reducing the risk of accidents caused by loose or improperly secured wheels.
- Preventing Damage: Incorrect lug nut sizes can damage the wheel studs or the wheels themselves, leading to costly repairs.
- Ease of Maintenance: Knowing the correct size makes it easier to perform routine maintenance, such as tire rotations or replacements.
By using the right lug nuts, you can maintain the integrity of your vehicle and ensure a safe driving experience.
Tips for Handling Lug Nuts
Here are some tips to keep in mind when working with lug nuts on your 2017 Ford Expedition:
- Use a Torque Wrench: Always tighten lug nuts to the manufacturer’s recommended torque specification to avoid over-tightening or under-tightening.
- Inspect Regularly: Check the condition of your lug nuts periodically for signs of wear, rust, or damage.
- Replace When Necessary: If a lug nut is stripped, damaged, or corroded, replace it immediately to maintain safety.
- Keep a Spare Set: Having a spare set of lug nuts in your vehicle can be helpful in emergencies.
Following these tips will help you maintain your vehicle’s wheels and ensure a smooth and safe driving experience.
Conclusion
For the 2017 Ford Expedition, the lug nut size is M14 x 2.0 with a 21 mm hex and a conical seat. Ensuring you use the correct size is vital for safety, preventing damage, and simplifying maintenance tasks. If you have any doubts or need assistance, don’t hesitate to consult a professional mechanic or visit a trusted auto repair shop like Kevin’s Autos. Proper care and attention to detail will keep your Expedition running smoothly for years to come.
Frequently Asked Questions
What size are the lug nuts on a Ford Expedition?
M14x1. 5 Open End Bulge Acorn Lug Nut - 19mm Hex - 60 Degree Cone Seat.
What size socket is my lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size socket are Ford lug nuts?
To remove and install Ford F150 lug nuts, you'll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.
Are Ford lug nuts metric or standard?
Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.
What size are the lug nuts on a 2017 Ford?
M14x1. 5 Open End Bulge Acorn Locking Lug Nuts (3/4" and 13/16" Hex)
What size socket is a 2015 Ford Expedition lug nut?
M14x1. 5 Open End Spline Tuner Duplex Lug Nut for Aftermarket Wheels.
What size impact wrench do I need to remove lug nuts?
This ensures you have plenty of power to break them loose. For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
What size are Ford wheel nuts?
M12 x 1.5 thread size and 19mm Hex.
What size is a wheel nut socket?
Sizes: 18.5, 19.5mm single Hex (6pt) x 1/2"D x 78mm long. Thin walled sockets with protective sleeve to prevent damage to alloy wheels.
