What size are the nuts on a Ford EcoSport?
The lug nuts on most Ford EcoSport models are M12 x 1.5 with a 19 mm wrench size, fitted to a 5-lug, 108 mm bolt circle. There can be variations by year and market, so it’s best to confirm against your specific vehicle.
Common specifications for EcoSport lug nuts
These are the baseline measurements you’re most likely to encounter on EcoSport models sold around the world.
- Thread size: M12 x 1.5
- Hex size (wrench size): 19 mm
- lug nut type: 60-degree conical (tapered) seat
- Bolt pattern: 5 bolts on a 108 mm circle (5x108)
- Stud diameter: 12 mm
Because wheel assemblies can vary by trim level or aftermarket modifications, always verify with your vehicle’s documentation or a dealer if you’re upgrading wheels or replacing hardware.
Verification and caveats
To ensure you have the exact specs for your EcoSport, check the owner’s manual, the driver’s door jamb placard, or contact a Ford dealer. This is especially important if you’ve changed wheels, fitted aftermarket rims, or are purchasing a kit for a seasonal tire change.
How to confirm your car’s exact lug nut specs
If you want a step-by-step approach to verify the nut size for your specific EcoSport, follow these steps:
- Inspect the door jamb placard or owner's manual for the factory wheel spec, including bolt pattern and lug nut size.
- Remove a wheel cap or inspect an existing lug nut with a ruler or caliper to confirm thread pitch and seat type.
- Consult Ford’s official parts diagrams or contact a dealership with your VIN for precise information.
- When purchasing replacement lug nuts or wheels, ensure compatibility with the 5x108 bolt pattern and M12 x 1.5 thread.
Following these steps will help you avoid mismatched hardware and ensure safe, proper fitment for your EcoSport wheels.
Summary
In practice, the Ford EcoSport typically uses M12 x 1.5 lug nuts with a 19 mm wrench size, on a 5x108 bolt pattern with a 60-degree conical seat. Always verify on your exact vehicle because there can be regional or trim-based variations, especially if aftermarket wheels are involved. When in doubt, consult the owner’s manual or a Ford dealer to confirm the precise specification for your car.
What size socket for Ford wheel nuts?
The most common socket size for Ford lug nuts is 13/16" or 21mm, especially for models like the F-150 and Bronco. However, sizes can vary by model year and specific vehicle, with some models like the Bronco Sport using a 19mm (or 3/4") socket. It is best to confirm the exact size for your vehicle, as some older or different models might use a different size.
- 13/16" or 21mm: This is the most common size for many modern Ford vehicles, including the F-150 and Bronco. Some sources suggest 13/16" may be a slightly tighter fit than 21mm, which can help prevent rounding the lug nuts.
- 19mm (or 3/4"): This size is used on certain models, such as the Bronco Sport.
- Verification: It's important to check your vehicle's manual or confirm the size before buying tools, especially since some models use a different size or have swollen lug nuts that may require a special socket.
- Swollen lug nuts: If you have a Ford with swollen lug nuts, a standard socket may not fit. In these cases, a special "flip" socket, which has a slightly larger size, can be used to remove them.
What size socket is a 2018 Ford Ecosport lug nut?
12 mm x 1.50 thread size, 13/16" hex.
What size are Ford wheel nuts?
Most modern Ford vehicles use M14x1.5 lug nuts, while some older models and certain trucks use M12x1.25 or M14x2.0. The most common size for a F-150 from around 2015 onwards is M14x1.5, and for F-250s it is M14x1.5. For older F-150s (2004-2014), the size is M14x2.0, and many other models like the Escape, Focus, and Fusion use M12x1.25. Always check your owner's manual for the specific size for your vehicle.
| Lug Nut Size | Common Vehicles |
|---|---|
| M14x1.5 | Most 2015+ F-150s, F-250s, Explorers, and Mavericks |
| M14x2.0 | 2004-2014 F-150s, 2003-2014 Expeditions, 2003-2014 Navigators |
| M12x1.25 | 2001-2022 Escape, 2012-2018 Focus, 2006-2020 Fusion, 2011-2022 Fiesta, 2019-2026 Ranger (including Raptor), 2021-2026 Bronco (non-Raptor) |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_n90laaDSF9z87_UP-M3vgQY_109';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
What size are the lug nuts on a 2017 Ford Ecosport?
DPAccessories M12x1. 50 Lug Nuts | Closed End Bulge Acorn | 36mm (1.4") Tall | 19mm (3/4") Hex.
