What size are the wheel nuts on a 2010 Honda CRV?
When it comes to maintaining your vehicle, knowing the correct specifications for parts like wheel nuts is essential. If you're working on a 2010 Honda CR-V, understanding the size of the wheel nuts can save you time and ensure a proper fit. In this article, we’ll provide the details you need and offer some tips for handling wheel nuts safely and effectively.
Wheel Nut Size for a 2010 Honda CR-V
The wheel nuts on a 2010 Honda CR-V are typically 19mm in size. This measurement refers to the size of the hexagonal head of the nut, which is the part that your wrench or socket will grip. Additionally, the thread size for these wheel nuts is M12 x 1.5, meaning the diameter of the threaded portion is 12mm, and the thread pitch is 1.5mm.
Why Knowing the Correct Wheel Nut Size Matters
Using the correct wheel nut size is crucial for several reasons:
- Safety: Properly fitting wheel nuts ensure that your wheels are securely attached to the vehicle, reducing the risk of accidents.
- Efficiency: Using the right tools and parts makes the job quicker and easier.
- Preventing Damage: Incorrectly sized nuts or tools can strip threads or damage the wheel hub.
Tips for Handling Wheel Nuts
Here are some tips to keep in mind when working with wheel nuts:
- Always use a torque wrench to tighten wheel nuts to the manufacturer’s recommended torque specification. For the 2010 Honda CR-V, this is typically around 80 ft-lbs (check your owner’s manual to confirm).
- Inspect the wheel nuts and studs for any signs of wear or damage before reinstalling them.
- When removing or installing wheel nuts, use a cross wrench or an impact wrench for better leverage and efficiency.
- Apply a small amount of anti-seize lubricant to the threads if you live in an area prone to rust, but avoid over-lubricating as it can affect torque readings.
Conclusion
Knowing the correct wheel nut size for your 2010 Honda CR-V—19mm with an M12 x 1.5 thread size—can make your maintenance tasks smoother and safer. Always follow proper procedures and use the right tools to ensure your vehicle remains in top condition. If you’re ever unsure or need professional assistance, don’t hesitate to reach out to a trusted auto repair shop like Kevin’s Autos for expert help!
Frequently Asked Questions
What is the wrench on the Honda CRV?
Maintenance Minder™
Maintenance Minder™: The Maintenance Minder™ indicator light is a yellow wrench. It comes on when your car is due for routine service, and it will disappear after the necessary maintenance is performed.
What size socket do I need for lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What bolt is a 2010 Honda CRV?
What bolt pattern does the Honda CRV have? Every generation of Honda CRV comes with a 5x114. 3 bolt pattern.
What size are the nuts on a Honda CRV?
Thread Size: M12-1.5.
What size wrench do I need to remove lug nuts?
For lug nuts, a 1/2-inch or even 3/4-inch impact wrench is a better choice.
Is 19mm the same as 3/4?
Yes. 3/4″ is . 750″ and 19mm is 0.74803 Inches. Only 2 thousands of an inch difference.
What size are Honda wheel nuts?
The lug nut size used on most Honda models is 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Some larger Honda trucks and SUVs may use 14×1.5 lug nuts instead. And a few older Honda models use the less common 12×1.25 size.
Are Honda bolts SAE or metric?
Most Honda hardware is comparable to metric grade 10.9 or higher. Steps To Knowing Your Bolts: When determining bolt sizes, look to the numbers. Manufacturers use them for identification purposes.
What type of lug nuts are on Honda CRV?
M12x1. 5 Bulge Acorn Wheel Lug Nut (3/4" Hex - Conical Seat) Crafted with precision machined threads and passed through our lengthy multi-point quality control process.
What size are my wheel nuts?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
