What size are the wheel nuts on a Ford Kuga?
The Ford Kuga commonly uses M12 x 1.5 wheel nuts with a 60-degree conical (tapered) seat, on a 5x108 bolt pattern, and typically requires a 19 mm wrench.
Wheel hardware can vary by generation, trim, and aftermarket wheels. While the above describes the most widely adopted OEM configuration, always verify the exact specs for your specific model year and wheel setup using official sources or your vehicle’s documentation.
Typical specifications for OEM wheels
Below is a concise snapshot of the specifications you’re most likely to encounter on Ford Kuga wheel nuts when using factory wheels. This helps you identify the right replacement parts and safe installation parameters.
- Bolt pattern: 5x108 mm
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (tapered) seating
- Nut hex size: 19 mm wrench
- Torque specification: approximately 110–125 Nm (81–92 ft-lb), depending on year and wheel type
These specifications cover the vast majority of OEM configurations. If your Kuga uses aftermarket wheels or a non-standard setup, sizes can differ and you should confirm with the wheel or vehicle manufacturer.
How to confirm the exact size for your model
To ensure you have the correct lug nuts for your specific Kuga, follow these steps:
- Consult the owner’s manual or the tire/wheel information label located in the door jamb or fuel filler area for the recommended lug specification and torque.
- Inspect your current lug nuts for thread size, seat type, and hex head size. If in doubt, measure with a caliper or compare with a known OEM nut.
- Contact a Ford dealership or a trusted tire shop with your vehicle identification number (VIN) to confirm the exact lug size for your year and wheel configuration.
- If you are installing aftermarket wheels, verify compatibility with the wheel manufacturer’s lug pattern (5x108), thread size, and seat type.
Ensuring you have the correct size and proper torque helps maintain wheel safety and protects studs and wheels from damage.
Important caveats
Some regional or performance variants of the Kuga may use different lug hardware. Always validate with official documentation or the supplier before purchasing lug nuts for a non-standard wheel configuration.
Summary: The Ford Kuga most often uses M12 x 1.5 lug nuts with a 60-degree conical seat on a 5x108 bolt pattern, with a typical wrench size of 19 mm and a torque target around 110–125 Nm. Always verify your specific model year and wheel setup to ensure accuracy and safety.
What size are Ford Kuga wheel nuts?
19mm Hex
Car Fitments
| Hex Size | 19mm Hex |
|---|---|
| Thread Size | M12 x 1.5 |
| Seat | Tapered Seat |
| Type | Wheel nuts |
| Finish | Zinc Plated |
What size socket for Ford wheel nuts?
The most common socket size for Ford lug nuts is 13/16" or 21mm, especially for models like the F-150 and Bronco. However, sizes can vary by model year and specific vehicle, with some models like the Bronco Sport using a 19mm (or 3/4") socket. It is best to confirm the exact size for your vehicle, as some older or different models might use a different size.
- 13/16" or 21mm: This is the most common size for many modern Ford vehicles, including the F-150 and Bronco. Some sources suggest 13/16" may be a slightly tighter fit than 21mm, which can help prevent rounding the lug nuts.
- 19mm (or 3/4"): This size is used on certain models, such as the Bronco Sport.
- Verification: It's important to check your vehicle's manual or confirm the size before buying tools, especially since some models use a different size or have swollen lug nuts that may require a special socket.
- Swollen lug nuts: If you have a Ford with swollen lug nuts, a standard socket may not fit. In these cases, a special "flip" socket, which has a slightly larger size, can be used to remove them.
What can I do if I've lost my locking wheel nut?
If you've lost a locking wheel nut, you should first check common places it might have been stored and then contact a professional like a tire shop or dealership for removal. If that's not an option, you can try a DIY method of hammering a specialized or 12-point socket onto the nut to remove it.
Step 1: Search for the key
- Look in common storage spots like the glove box, center console, under the spare tire, or in the trunk.
- Contact the last person or company who worked on your vehicle to see if they have it.
Step 2: Seek professional removal
- Visit a tire shop or mechanic: These professionals have specialized tools and techniques to remove the nut without damaging your wheel.
- Contact the dealership: They may be able to get a replacement key or have a procedure for removal.
Step 3: Use a DIY removal method (if comfortable and the nut isn't a "spinning collar" type)
- Hammer on a socket: Hammer a 12-point socket that is slightly undersized over the locking nut. The socket's edges will bite into the nut, allowing you to use a breaker bar to twist it off.
- Use a specialized removal tool: You can purchase a wheel lock removal kit that has a spiral groove for better grip than a standard socket.
- Important: After removing the old locking nuts, replace them with standard lug nuts and ensure they are torqued correctly.
This video demonstrates how to remove a locking lug nut using a specialized tool and a torque wrench: 54sChrisFixYouTube · Aug 13, 2023
Step 4: After removal
- Once the old locking wheel nut is removed, replace it with a standard wheel nut or purchase a new set to ensure the wheel is secure.
What size are Ford wheel nuts?
Most modern Ford vehicles use M14x1.5 lug nuts, while some older models and certain trucks use M12x1.25 or M14x2.0. The most common size for a F-150 from around 2015 onwards is M14x1.5, and for F-250s it is M14x1.5. For older F-150s (2004-2014), the size is M14x2.0, and many other models like the Escape, Focus, and Fusion use M12x1.25. Always check your owner's manual for the specific size for your vehicle.
| Lug Nut Size | Common Vehicles |
|---|---|
| M14x1.5 | Most 2015+ F-150s, F-250s, Explorers, and Mavericks |
| M14x2.0 | 2004-2014 F-150s, 2003-2014 Expeditions, 2003-2014 Navigators |
| M12x1.25 | 2001-2022 Escape, 2012-2018 Focus, 2006-2020 Fusion, 2011-2022 Fiesta, 2019-2026 Ranger (including Raptor), 2021-2026 Bronco (non-Raptor) |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_u-wlaafTHNKQi-gP8eKo-QM_332';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
