What size engine is in a Chevrolet Epica 2008?
The 2008 Chevrolet Epica was equipped with a 2.5-liter inline 4-cylinder engine. This engine provided adequate power and performance for the midsize sedan, delivering 156 horsepower and 171 lb-ft of torque.
Detailed Engine Specifications
The 2.5-liter engine in the 2008 Chevrolet Epica was a naturally aspirated, dual overhead cam (DOHC) design. It had 16 valves and used electronic fuel injection for efficient fuel delivery. The engine block was constructed of cast iron, while the cylinder head was made of aluminum alloy.
Key engine specifications for the 2008 Chevrolet Epica 2.5-liter inline 4-cylinder engine include:
- Displacement: 2,498 cc (152.4 cubic inches)
- Bore x Stroke: 89 mm x 82 mm (3.50 in x 3.23 in)
- Compression Ratio: 10.0:1
- Horsepower: 156 hp (116 kW) @ 6,000 rpm
- Torque: 171 lb-ft (232 Nm) @ 4,500 rpm
- Valvetrain: DOHC, 16 valves
- Fuel System: Electronic Fuel Injection
- Engine Block: Cast Iron
- Cylinder Head: Aluminum Alloy
This engine provided a good balance of power, efficiency, and reliability for the 2008 Chevrolet Epica, making it a suitable choice for the midsize sedan's intended use.
What is the engine code for the Chevy Epica?
Additional information
| Weight | 150.0000 kg |
|---|---|
| Engine code | Z20S |
| Engine Type | 2.0 VCDI 150 Hp |
| Herstellernummer | Z20S |
| Category | Engines |
What is a 318 engine?
In the mid-1960s, Chrysler decided to adapt the 318 cu in (5.2 L) small block V8 into a lightweight, high output engine equally suited for drag strip or street performance use.
What size engine is in a 2008 Chevrolet Cobalt?
LS and LT models use a 2.2-liter four-cylinder that makes 148 hp and 152 pounds-feet of torque. Sport models hold a 171-hp 2.4-liter engine. Both engines are available with a five-speed manual or a four-speed automatic transmission.
What engine code i have?
The engine code letters and the consecutive engine number are always on the engine, although they are not necessarily visible to you, but are stamped into the block and are usually difficult to read. The code is therefore often written on a sticker (the vehicle data carrier), which is attached to the timing belt cover.
How many cylinders are in the 2008 Chevy Epica?
6
What size engine is in an epica?
HOLDEN Epica 2.5L 6AT FWD (155 HP)
| ENGINE SPECS - 2.5L 6AT FWD (155 HP) | |
|---|---|
| Cylinders: | L6 |
| Displacement: | 2492 cm3 |
| Power: | 115 KW @ 5800 RPM 155 HP @ 5800 RPM 154 BHP @ 5800 RPM |
| Torque: | 174 lb-ft @ 4600 RPM 236 Nm @ 4600 RPM |
How much horsepower does a 2.2 Cobalt have?
148 hp
2007: The 2.2L engine was retuned and now developed 148 hp (110 kW) at 5600 RPM and 152 ft⋅lb (206 N⋅m) at 4200 RPM while retaining the same fuel economy.
How many miles can a 2008 Chevy Cobalt go?
The Chevy Cobalt has a typical mileage of 190,000-210,000 miles. Thus, the high mileage for the Chevy Cobalt is around the 150,000-mile mark.
How much horsepower does the Chevy Epica have?
| Chevrolet Epica 2.0 Engine Technical Data | |
|---|---|
| Aspiration : | naturally-aspirated |
| Compression Ratio : | 10.2 |
| Horsepower : | 139 HP / 141 PS / 104 kW @ 6400 rpm |
| Maximum torque : | 143 lb-ft / 195 Nm @ 3800 rpm |
What is the Chevy Epica the same as?
The Daewoo Tosca is a mid-size car designed by Daewoo in South Korea and marketed by Chevrolet as the Chevrolet Epica and Chevrolet Tosca, while Holden marketed it as the Holden Epica. Codenamed V250, it replaces the Daewoo Magnus and its derivatives.
