What size is a Toyota axle nut?
The size of a Toyota axle nut can vary depending on the specific model and year of the vehicle. However, the most common sizes for Toyota axle nuts are 30mm, 32mm, and 36mm. These sizes are typically used across a wide range of Toyota models, from compact cars to full-size trucks.
Understanding Axle Nuts
Axle nuts are an essential component of a vehicle's suspension system, responsible for securing the wheel hub and bearing assembly to the axle. They play a crucial role in maintaining the proper alignment and stability of the wheels, ensuring a smooth and safe driving experience.
The size of the axle nut is determined by the diameter of the axle shaft, which can vary depending on the vehicle's make, model, and year. It's important to use the correct size axle nut to ensure a secure fit and prevent potential issues, such as wheel separation or bearing failure.
Common Toyota Axle Nut Sizes
- 30mm: This is a common size for many Toyota models, including the Corolla, Camry, and RAV4.
- 32mm: This size is often found on larger Toyota vehicles, such as the Tundra and Sequoia.
- 36mm: This larger size is typically used on Toyota's full-size trucks, like the Tacoma and Tundra.
It's important to always refer to your vehicle's owner's manual or consult with a professional mechanic to determine the correct axle nut size for your specific Toyota model.
Replacing Axle Nuts
When replacing axle nuts, it's crucial to use the correct size and tightening torque to ensure the proper functioning of the suspension system. Overtightening or using the wrong size nut can lead to damage to the axle, wheel bearings, or other components.
If you're unsure about the proper axle nut size or tightening procedure for your Toyota, it's best to consult a professional mechanic or refer to your vehicle's service manual for the specific instructions.
What size is the axle nut on a 2007 Toyota Corolla?
Notes: Axle Nut -- M22 x 1.5, 12-Point Hex Star Pattern Nut. 2003-2018 Toyota Corolla.
What size is the axle nut on a Toyota Camry?
Notes: Axle Nut -- M22 x 1.5, 12-Point Hex Star Pattern Nut. 2002-2018 Toyota Camry.
What size are axle lug nuts?
More than likely if it's a newer one newer axle or if you buy it from Trailer Parts Unlimited. It's going to be 9 16s. And then you have your 5 8 cone nut you'll see these on 8ks 10ks and 12ks.
What size socket do I need for wheel nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is a Toyota wheel nut?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
What size socket is the axle nut on a Toyota Tundra?
39mm
Lisle 39650 39mm Axle Nut Socket for Toyota Tundra/Sequoia/Land Cruiser.
What size are the wheel nuts on a Toyota Highlander?
12x1. 5 Chrome Mag Lug Nuts fits Factory Toyota/Lexus OE Alloy Wheels. Fits: Most Toyota/Lexus vehicles with 12x1. 5 wheel studs and factory aluminum wheels.
How do I know my wheel nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it.
What size socket is needed to remove a CV axle?
36mm is correct. Make sure it's attached to a decent breaker bar; those things are on there pretty tight.
What size socket is a Toyota axle nut?
39650 39mm 12 pt Axle Nut Socket for Toyota.
