What size is a Toyota sump plug?
The size of a Toyota sump plug can vary depending on the specific model and year of the vehicle. However, the most common sump plug size for Toyota vehicles is 17mm. This size is typically used across a wide range of Toyota models, including popular options like the Corolla, Camry, and RAV4.
Understanding the Sump Plug
The sump plug, also known as the drain plug, is a crucial component in the oil system of a vehicle. It is located at the bottom of the oil pan and is responsible for allowing the old oil to be drained during an oil change. The size of the sump plug is an important factor to consider when performing this routine maintenance task, as using the wrong size can lead to leaks or even damage to the oil pan.
Determining the Sump Plug Size for Your Toyota
To determine the specific sump plug size for your Toyota, you can refer to the owner's manual or consult with a professional mechanic. Additionally, you can check the size of the existing sump plug by measuring it with a wrench or socket. The most common sizes for Toyota sump plugs are:
- 17mm
- 19mm
- 22mm
It's important to use the correct size sump plug to ensure a proper seal and prevent any leaks or damage to the oil pan.
Replacing the Sump Plug
When replacing the sump plug, it's essential to follow the proper procedure to avoid any issues. Here are the steps to replace a Toyota sump plug:
- Locate the sump plug, which is typically located at the bottom of the oil pan.
- Use the appropriate size wrench or socket to loosen and remove the sump plug.
- Clean the threads of the oil pan and the sump plug to ensure a proper seal.
- Apply a small amount of thread sealant or oil to the threads of the new sump plug.
- Carefully thread the new sump plug into the oil pan and tighten it securely.
- Check for any leaks and ensure the sump plug is properly sealed.
Following these steps will help ensure that the new sump plug is installed correctly and will prevent any future issues with oil leaks or damage to the oil pan.
What is the thread pitch of the oil drain plug on a Toyota Tacoma?
Thread Pitch: 1.25.
What size is the oil drain plug size?
Oil Drain Plug Standard M12-1.5, Head Size 17Mm.
What size is a Toyota drain plug?
M12 x1. 25 Magnetic Oil Drain Plug Stainless Steel with Red Copper Washer Gaskets Replacement for Toyota, Lexus, Nissan, InfinitiM12 x1.
What size socket do I need to take the oil?
Most common sizes you need are 7, 8, 10, 12, 18 and 19. Well I did a full PDI (obviously didn't change fluid yet), and didn't need more than 16. You need an 18 for the spark plug and the 19 for the oil. Pretty much everything else can use the smaller sockets.
What size is the oil drain plug on a 2003 Toyota Camry?
Notes: Engine Oil Drain Plug. M12 x 1.25 thread. Packaging type: clamshell.
What size is the oil pan drain plug on a Toyota Tacoma?
Dorman – Standard Engine Oil Drain Plug: M12-1.25 Thread, 14 mm Head, 1 Pack (Part No. 090-038CD)
What size is the oil drain plug on a 2016 Toyota Tundra?
Locate the Toyota Tundra engine oil drain plug, located on the right passenger side of the oil pan. Using a 14-millimeter socket and rachet loosen and remove the drain plug and sealing washer in a counterclockwise direction. Allow the old oil to drain into a suitable waste oil drain pan.
What size socket for oil drain plug Toyota Camry?
Oil drain plug M12-1.25.
What size is the thread on a Toyota sump plug?
SUMP PLUG BUYING GUIDE
| BRAND | MAKE/MODEL | THREAD |
|---|---|---|
| Toyota | Hilux, Prado, Aurion, Camry. | 12mm-1.25 |
| Volvo | 6 cylinder engines('76 – '82) | 16mm-1.5 |
| VW | ||
| VW | 26mm-1.5 |
Are all sump plugs the same size?
All sump plugs are the same, I would suggest what has happened is a previous owner has stripped the thread and tapped it to a different size as a repair. It's bad practise to do that anywhere but in this case very problematic indeed.
