What size is the axle nut socket on a 2017 Ford Edge?
The axle nut on a 2017 Ford Edge generally requires a 32 mm socket (about 1-1/4 inch). This size covers most front-drive and all-wheel-drive configurations for this model, but variations can occur depending on the exact drivetrain or manufacturing batch. Always verify by checking the nut itself or consulting the Ford service manual for your specific vehicle.
Details about the axle nut size for the 2017 Edge
In typical 2017 Edge configurations, the front axle nut used to secure the wheel hub assembly is commonly 32 mm. While this size is standard for many examples of this model, there can be exceptions based on drivetrain (FWD versus AWD) or aftermarket parts. When in doubt, verify with the nut’s stamping, the factory service manual, or a reliable parts diagram for your exact VIN.
Tools and verification
To prepare for checking or replacing the axle nut, assemble the following items. This helps ensure you have the correct socket size and can perform the task safely.
- 32 mm socket (approximately 1-1/4 inch)
- Breaker bar or impact wrench
- Torque wrench for reassembly
- Jack, jack stands, and wheel chocks
- Wheel lug wrench or breaker bar for securing the wheel
Using the correct size prevents the risk of rounding the nut and ensures safe removal and reassembly during maintenance or repair.
How to confirm the size on your specific vehicle
- Inspect the nut for a size stamp; many axle nuts have the size printed on the flat of the nut itself.
- Consult the vehicle’s official service manual or a Ford dealer parts diagram for the exact specification for your trim and drive configuration.
- If you’re unsure, try sockets in a snug, non-forcing manner starting at 32 mm to confirm the fit; avoid forcing a socket onto the nut.
- For replacement parts, check the accompanying documentation of the hub or axle assembly, which will specify the correct nut size to use.
When in doubt, contact a Ford service representative or a certified mechanic to confirm the correct nut size for your particular vehicle configuration.
Safety and best practices
Always follow proper lifting procedures and use jack stands. Replacing or re-torquing an axle nut requires adherence to Ford’s torque specifications and procedure steps to ensure safe operation of the wheel assembly.
Summary
For the 2017 Ford Edge, the front axle nut socket is typically 32 mm (1-1/4 inch). While that size covers most configurations, verify on your specific vehicle via the nut stamping, the service manual, or a parts diagram, especially if you have an AWD model or aftermarket components. Use the correct tools and follow safe repair practices to ensure a proper fit and secure reassembly.
What size is the axle nut on a 2017 Ford Edge?
Axle Nut Length: 20.5mm. Axle Nut Socket Size: 31.5mm.
What size socket to remove axle nut?
The socket size for an axle nut depends on the vehicle, but common sizes are 30mm, 32mm, 33mm, 34mm, 35mm, 36mm, and 39mm. It's best to use a 12-point, deep-well impact socket with a 1/2-inch drive for durability, but you should always consult your vehicle's manual for the exact size and torque specifications before starting.
You can watch this video to learn how to remove the axle nut on a Toyota: 12sCollegeAutomotiveClassesYouTube · Apr 13, 2019
What you'll need
- Correct socket size: Check your vehicle's manual to confirm the exact size. Common sizes include 30mm, 32mm, 33mm, 34mm, 35mm, 36mm, or 39mm.
- 1/2-inch drive deep-well impact socket: A standard socket may not be strong enough for the high torque. A 12-point socket is recommended to prevent rounding the nut.
- Torque wrench: A calibrated torque wrench is essential for properly torquing the new nut to the correct specification, which is often between 150-250 ft-lbs.
- Breaker bar or long-handled ratchet: This will give you the leverage needed to break the nut loose.
- Penetrating oil and a wire brush: These can help loosen rust and corrosion.
Before you begin
- Park on a level surface: and engage the parking brake.
- Loosen the axle nut while the wheel is still on the ground: if possible, as it will prevent the wheel from spinning.
- Jack up the vehicle: and remove the wheel.
- Consult your vehicle's service manual: to find the correct socket size and torque specification for your specific vehicle model.
This video demonstrates how to remove the axle nut using a breaker bar: 1mBundysGarageYouTube · Jun 15, 2019
Removing the nut
- Spray with penetrating oil: Apply penetrating oil to the nut and allow it to soak in to help break up rust and corrosion.
- Use the correct socket: Fit the correct size 12-point deep-well impact socket onto the nut.
- Apply force: Use a breaker bar to apply strong, steady force to break the nut loose. You may need to use a cheater pipe to increase leverage.
- Remove the nut: Once broken loose, remove the nut with a ratchet or impact wrench.
You can watch this video to learn how to remove the axle nut without impact tools: 44sDIY-timeYouTube · May 24, 2022
What size is the axle nut on a 2017 Ford Explorer?
M22 x 1.5 mm
Notes: Front and rear, Axle Nut. M22 x 1.5 mm.
What size is the axle nut socket on a 2015 Ford Edge?
| Item Specifics | |
|---|---|
| Axle Nut Type: | Hex |
| Axle Nut Socket Size: | 31.5 |
| Axle Nut Length: | 20.5 |
| Axle Nut Included: | Yes |
