What size is the brake caliper bolt on a Ford Fiesta?
The standard brake caliper bolt size for a Ford Fiesta is M12 x 1.5. This means the bolts have a diameter of 12 millimeters and a thread pitch of 1.5 millimeters.
Detailed Explanation
The brake caliper on a Ford Fiesta is responsible for applying pressure to the brake pads, which in turn press against the brake rotor to slow down and stop the vehicle. The caliper is secured to the vehicle's suspension or brake assembly using several bolts, typically four or more.
For the Ford Fiesta, the specific size of these brake caliper bolts is M12 x 1.5. This is a common size used across many vehicle makes and models. The "M12" refers to the bolt diameter of 12 millimeters, while the "1.5" indicates the thread pitch, or the distance between each thread, is 1.5 millimeters.
It's important to use the correct size and grade of bolt when servicing or replacing the brake calipers on a Ford Fiesta. Using the wrong size or lower-grade bolt could compromise the integrity of the brake system and potentially lead to safety issues.
Torque Specifications
In addition to the bolt size, it's also crucial to tighten the brake caliper bolts to the proper torque specification. For a Ford Fiesta, the recommended torque for the M12 x 1.5 caliper bolts is typically between 70-90 Nm (51-66 lb-ft).
Overtightening or undertightening the bolts can cause problems, such as the caliper becoming misaligned or the bolts potentially shearing off. Always refer to the vehicle's service manual or consult a professional mechanic to ensure the caliper bolts are tightened to the correct torque.
What wrench do you need to remove a brake caliper?
Use sockets and a ratchet to remove the caliper from the suspension.
What is the torque on brake caliper bolts Ford Fiesta?
Caliper bolts tq value is 21 ft lbs/26nm.
Are all brake calipers the same size?
Brake calipers come in all different shapes and sizes. What size caliper you need entirely depends on what vehicle you've got. Theres a simple solution for this however. Make your way over to the search bar and just search up your vehicle.
What size torque wrench for caliper bolts?
3/8 -Inch Torque Wrench.
Do caliper bolts need to be tight?
I think it's so important to understand why you're doing something when you're doing it not just to repeat it as a as a parrot or or a trained monkey or something.
What size socket for brake calipers?
Welcome and thank you for allowing me to assist you! to remove the caliper bolts from the bracket, you will need either a 13mm or 15mm socket wrench.
What size is a M14 socket?
【Ideal 14mm Triple Square Metric Spline Socket】 M14 (14mm) sockets work with tools such as ratchets to quickly and easily tighten drive fasteners. 【Specification】 1/2-Inch Impact Drive Socket, M14 (14mm) spline bit, 3.07-inch (714mm) total length. The lengthened design makes it suitable for more work scenarios.
What size are brake caliper bracket bolts?
caliper bracket bolts are M12x1. 5x45 grade 10.9.
What size is a brake line bolt?
3/16" (4.75mm): This is the most common size used in most passenger vehicles. It is often referred to as the "universal size" for brake lines.
What is the bolt on the back of the caliper called?
Remove them and your calipers fall off. Plain and simple. They're often called “caliper bracket bolts” because they attach to the part of your caliper called the bracket, and hold it tight to the spindle or steering knuckle.
