What size is the drain plug on a 2017 Subaru Forester?
As a car owner, knowing the specifications of your vehicle can save you time and money, especially when it comes to maintenance tasks like oil changes. One crucial aspect of this is understanding the size of the drain plug. In this article, we will explore the drain plug size for the 2017 Subaru Forester, ensuring you have the right tools for your next oil change.
What is a Drain Plug?
The drain plug is a small but essential component located at the bottom of the oil pan. It allows for the easy draining of engine oil during an oil change. Knowing the correct size of the drain plug is vital for ensuring you have the right socket or wrench to remove it without damaging the threads.
Drain Plug Size for the 2017 Subaru Forester
For the 2017 Subaru Forester, the drain plug size is typically 17mm. This measurement is standard for many Subaru models, making it easier for owners to remember when performing maintenance.
Steps to Change the Oil Using the Drain Plug
Changing your oil can be a straightforward process if you follow these steps:
- Gather Your Tools: You will need a 17mm socket or wrench, an oil filter wrench, a drain pan, and new oil and filter.
- Prepare Your Vehicle: Park your Forester on a level surface and turn off the engine. Allow it to cool down.
- Locate the Drain Plug: Get under the vehicle and find the drain plug at the bottom of the oil pan.
- Remove the Drain Plug: Use the 17mm socket to loosen and remove the drain plug. Allow the old oil to drain completely into the pan.
- Replace the Drain Plug: Once drained, replace the drain plug and tighten it securely.
- Change the Oil Filter: Use the oil filter wrench to remove the old oil filter and replace it with a new one.
- Add New Oil: Pour in the new oil through the oil filler cap, ensuring you use the correct type and amount specified in your owner’s manual.
- Check for Leaks: Start the engine and let it run for a few minutes. Check under the vehicle for any leaks around the drain plug and oil filter.
Conclusion
Knowing the drain plug size for your 2017 Subaru Forester is just one part of effective vehicle maintenance. With the right tools and a bit of knowledge, you can perform oil changes confidently and keep your vehicle running smoothly. If you have any doubts or prefer professional assistance, don't hesitate to reach out to your local auto service provider.
Frequently Asked Questions
How many quarts of oil does a 2017 Subaru Forester take?
5.1 quarts
Oil Grade: SN
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.1 quarts (with filter). After refill check oil level. |
| Torque: | 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
Where is the oil drain plug on a Subaru Forester?
Up. Take the drain plug out you're going to want to make sure you have a drain bucket underneath.
What size wrench do I need to remove the oil drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise.
What size is Subaru oil drain plug?
Plug 16X17 - 807016210 - Genuine Subaru Part.
What size is the drain plug on a 2017 Subaru Outback?
the 2017 outback drain plug is either a 17mm or a 14mm.
What size is the oil drain plug on a 2017 Subaru Forester?
Plug 16X17. Engine Oil Drain Plug.
How to find out oil drain plug size?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size are drain plugs?
According to rockauto.com, your drain plug should be an M12x1. 75 with a 15mm head. If a 15mm wrench is not fitting onto it, get a new drain plug, then get the old one off using whatever method which will work (short of breaking something you still need!).
What size socket for Subaru Forester oil drain plug?
typically 18-24 for a drain plug bolt.
What size socket is my drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
