What size is the oil drain plug on a 2010 Dodge Journey?
The standard oil drain plug for a 2010 Dodge Journey is a 14 mm drain plug (M14 x 1.5) with a 14 mm hex head. This size applies to the common 2.4L inline-four and the 3.5L V6 engines found in that year. Always verify against your vehicle’s manual or by inspecting the plug itself.
Engine options in the 2010 Dodge Journey
In 2010, the Journey offered two main engine options. Here’s a quick overview of what you might have under the hood, both of which typically use the same drain plug size.
- 2.4-liter inline-four (I4)
- 3.5-liter V6
For these common engines, the drain plug size is generally the same, but it’s wise to confirm for your exact vehicle, especially if you have a regional or late-production variant.
How to verify the oil drain plug size on your vehicle
If you want to be certain about your specific car, follow these verification steps before you service the oil.
- Consult the owner’s or service manual for the exact drain plug specification (thread size and head size).
- Inspect the plug head and try a 14 mm hex socket; do not force a different size if it doesn’t fit cleanly. If it doesn’t fit, refer to the manual or seek professional guidance before attempting an alternative size.
- Contact a Chrysler/Dodge dealer or a qualified mechanic with your VIN to confirm the precise specification for your vehicle.
Using the correct size helps prevent stripping the plug and ensures a proper seal during an oil change.
Additional maintenance reminders
Beyond the plug size, use the recommended oil type for your engine (often 5W-20 for many 2010 Journeys) and replace the drain plug gasket or washer if required by the design. Check your owner's manual for exact capacity and procedures.
Summary: For the 2010 Dodge Journey, the typical oil drain plug size is 14 mm (M14 x 1.5) with a 14 mm hex head, applicable to the 2.4L I4 and 3.5L V6 engines. Always verify against your manual or VIN if you’re unsure.
What size socket do I need for my oil plug?
The correct socket size for an oil plug depends on your car's make and model, as there is no single universal size. Common metric sizes include 14mm, 15mm, 17mm, and 19mm, while some older vehicles may use SAE sizes like 3/8" or 1/2". Always inspect the plug to confirm the size, as using the wrong socket can damage the bolt head.
You can watch this video to learn how to change the oil in a Honda CR-V, including removing the drain plug: 1m1A Auto: Repair Tips & Secrets Only Mechanics KnowYouTube · Aug 13, 2018
How to find the right size
- Check your owner's manual: This is the most reliable way to find the correct size for your specific vehicle.
- Inspect the plug: Visually examine the drain plug to determine its size. You can also measure it with a caliper if needed.
- Try common sizes: If you can't find your manual, start with common metric sizes like 14mm, 15mm, 17mm, or 19mm.
- Use the right socket type: A 6-point socket is recommended over a 12-point socket to prevent stripping the bolt head.
This video demonstrates how to use a drain plug removal tool with a magnetic feature: 52sScavenger1320YouTube · Feb 23, 2024
Important tips
- Use the correct socket: A well-fitting socket is crucial to avoid rounding the bolt head.
- Tighten properly: Do not overtighten the drain plug, as this can strip the threads. Tighten it to the manufacturer's specifications, or just snug it up if you don't have a torque wrench.
- Replace the crush washer: It is a good practice to replace the crush washer on the drain plug to ensure a proper seal.
What size is a Dodge oil drain plug?
Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 13 mm Head, 1 Pack (Part No. 090-938CD)
What size is the oil drain plug on a Dodge Journey?
The common size for a Dodge Journey oil drain plug is M14-1.50, with a 13mm or 16mm hex head depending on the specific model and year. It's best to verify the correct size with a parts store or a mechanic for your specific vehicle.
- Thread size: M14-1.50
- Hex head size: Commonly 13mm or 16mm
- Recommendation: Confirm the exact size for your specific model year and engine.
How many quarts of oil does a 2010 Dodge Journey 3.5 take?
The 2010 Dodge Journey 3.5L engine requires 6 quarts of oil for a full oil and filter change, which is the most common recommendation. However, some sources suggest a slightly different capacity, with the initial fill being around 5.5 quarts. It is important to always fill the correct amount and then check the dipstick to ensure the level is correct before finishing.
Oil capacity details
- Total with filter: 6 quarts
- Initial fill (if starting from empty): Approximately 5.5 quarts
- Final check: After adding the oil, start the engine for a few minutes to circulate the new oil, then turn it off and check the dipstick to confirm the level is correct and add more if needed.
